Laser Diodes & Sources
Our high power pulsed 1550nm fiber lasers provide eye-safe single mode nanosecond pulse with average output power up to 3W with a near-diffraction-limited beam quality. They are all fiber high reliability construction using double cladding fiber pumping technology that efficiently converts multi-mode lasers into highly coherent single-mode lasers. The laser source can be configured as a module or a turn-key unit with a built-in feedback power stabilization controller and power supply. Our also provides customer’s design. We provide an output beam collimator, as well as wavelength stabilization choices. Warning: The standard connector is intended for low-power testing below 1W. Operating at higher power levels may cause damage to the connector and the laser core. For high-power applications, cutting off the connector and splicing is recommended.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: HPPL-5T1111111
Wavelength: 1550nm · Output Power: 10W · Mode: Random · Linewidth: 4nm · Interface: USB · Fiber Type: SM28 · Fiber Cover: 900µm tube · Fiber Connector: Non · Back reflection Protector: Non
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
High Power Single Mode 1550nm Laser – Pulse: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1550nm wavelength specification sets source and detector compatibility. The fiber/interface entry (SM28, PM1550) must match the connected components.
High Power Single Mode 1550nm Laser – Pulse: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1550nm wavelength specification sets source and detector compatibility. The fiber/interface entry (SM28, PM1550) must match the connected components.
System integration
Use these checks to connect High Power Single Mode 1550nm Laser – Pulse to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Interface: USB, RS232 · Fiber Type: SM28, PM1550. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1550nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare High Power Single Mode 1550nm Laser – Pulse with the closest available models in the Laser Diodes & Sources family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | High Power Single Mode 1550nm Laser – Pulse (current) | High Power Narrow Line DFB Laser Diode Chips | Laser Diode/TEC Controllers – Benchtop Kit |
|---|---|---|---|
| Wavelength range | 1550nm | 1550nm | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | SM28, PM1550 | Confirm for this model | Confirm for this model |
| Connector / control | USB, RS232 | Confirm for this model | Confirm for this model |
