Laser Diodes & Sources
The FCMH series diode lasers deliver up to 500 W of power through a 50/125 µm fiber. They provide high brightness and simplified thermal management by distributing the diodes (heat sources), allowing for a water-cooled architecture with reliable, predictable performance. A turn-key benchtop unit is available, integrating the power supply, water cooling, power control, and safety shut-off features.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 915nm · Output Power: 3W · Package: A · Fiber Type: 105/125 µm · Fiber Buffer: Bare · Fiber Length: 0.25m · Connector: Non
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Fiber Coupled High Power Multimode Laser 915nm, 940nm, 976nm (<10W): Laboratory optical integration depends on preserving the optical budget through the complete path. The 915nm, 940nm, 976nm wavelength specification sets source and detector compatibility. The fiber/interface entry (105/125 µm, 50/125 μm, 200 µm) must match the connected components.
Fiber Coupled High Power Multimode Laser 915nm, 940nm, 976nm (<10W): Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 915nm, 940nm, 976nm wavelength specification sets source and detector compatibility. The fiber/interface entry (105/125 µm, 50/125 μm, 200 µm) must match the connected components.
System integration
Use these checks to connect Fiber Coupled High Power Multimode Laser 915nm, 940nm, 976nm (<10W) to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: 105/125 µm, 50/125 μm, 200 µm · Fiber Buffer: Bare, 0.9mm Tube, 3mm Tube, Armor. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 915nm, 940nm, 976nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Fiber Coupled High Power Multimode Laser 915nm, 940nm, 976nm (<10W) with the closest available models in the Laser Diodes & Sources family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Fiber Coupled High Power Multimode Laser 915nm, 940nm, 976nm (<10W) (current) | Fiber Coupled High Power Multimode Laser – 450nm | Fiber Coupled Laser Multimode High Power |
|---|---|---|---|
| Wavelength range | 915nm, 940nm, 976nm | 450nm | 976nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | 105/125 µm, 50/125 μm, 200 µm | 200 µm, 105µm | 105/125 |
| Connector / control | Non, SMA | Non, SMA | Non, SMA |
