Back to Home
Precisometer

Spectroscopie-instrumenten

Spectrografen &Monochromatoren

Czerny-Turner-instrumenten van 200 tot 750 mm, aberratiegecorrigeerde beeldspectrografen, en dubbele en drievoudige trappen voor werk dicht bij de laserlijn.

Vind uw spectrometer →Bekijk het assortiment
EntranceExit SlitCollimatorFocus MirrorGrating
Sweep grating angle:532 nm (Green)

Versleep de tralie. De uitgangsgolflengte volgt.

Step 1 — Choose

Which spectrometer do you actually need?

Three questions. The answer names the model, shows the manufacturer figures behind it, and hands the choice straight to the port builder and the grating planner.

1. What are you measuring?
2. What matters more?
3. How close is the signal to an intense line?

Recommended

Omni-λ300i

Focal length
320 mm
Aperture
f/4.2
Dispersion
2.29 nm/mm
Resolution (PMT)
0.08 nm
Resolution (CCD)
0.173 nm
Stray light
1×10⁻⁵
  • Raman needs enough dispersion to separate bands a few cm⁻¹ apart without starving the detector.
  • 2.29 nm/mm dispersion gives 0.08 nm with a PMT and 0.173 nm on a CCD.
  • At f/4.2 it collects 1× the light of the 320 mm reference.

Also consider Omni-λ500i: Roughly 1.5× the dispersion when bands are still merging.

Step 2 — Configure ports & slits →Step 3 — Plan the grating turret →

Stap 2 — Vergelijk

Resolutie of licht. Beide kan niet.

Elk model hier is hetzelfde optische ontwerp met een andere brandpuntsafstand. Langer spreidt het spectrum verder uit, en kost u fotonen.

Finer detail — lower nm is better

Het volledige assortiment

Elke spectrometer en accessoire

De volledige lijn spectrometers, monochromatoren en accessoires, met specificaties rechtstreeks uit de datasheets van de fabrikant.

Spectrometers en monochromatoren

Omni-λ Series — Omni-λ Monochromators and Spectrographs

Imaging corrected spectrometers

Omni-λ Series

Omni-λ Monochromators and Spectrographs

The Czerny-Turner monochromator and spectrograph line the rest of the spectroscopy range is built around, in 200, 320, 500 and 750 mm focal lengths. Every model ships pre-aligned and pre-calibrated, and the 320 mm and longer models take an interchangeable triple grating turret so UV, visible and NIR gratings can be swapped under software control.

Belangrijkste specificaties (17)▾
Focal length
200 / 320 / 500 / 750 mm
Aperture ratio
f/3.5, f/4.2, f/6.5, f/9.7
Resolution (PMT)
0.15 / 0.08 / 0.05 / 0.03 nm
Resolution (CCD, 26 µm)
0.27 / 0.173 / 0.11 / 0.077 nm
Dispersion
3.58 / 2.29 / 1.49 / 1.02 nm/mm
Wavelength accuracy
±0.2 nm (all models)
Wavelength repeatability
±0.1 nm (200i), ±0.025 nm (320/500/750)
Step size
0.01 nm (200i), 0.005 nm (320/500/750)
Stray light
5×10⁻⁵ (200i), 1×10⁻⁵ (320/500/750)
Focal plane size
30 (w) × 14 (h) mm
Optical axis height
146 mm
Slit
Width 0.01–3 mm, motorised or manual; height 2, 4 or 14 mm selectable
Grating size
50 × 50 mm (200i), 68 × 68 mm (320/500/750)
Grating mount
Dual turret (200i), interchangeable triple turret (320/500/750)
Interface
USB 2.0 (200i); USB 2.0 and RS232 (320/500/750)
Dimensions
300×216×213 / 420×295×232 / 550×288×220 / 800×338×218 mm
Weight
14 / 16 / 22 / 32.5 kg
Bestelopties (4)▾
  • Omni-λ200i — 200 mm, f/3.5, dual grating turret
  • Omni-λ300i — 320 mm, f/4.2, triple grating turret
  • Omni-λ500i — 500 mm, f/6.5, triple grating turret
  • Omni-λ750i — 750 mm, f/9.7, triple grating turret
Bekijk product →Datasheet (pdf)
HiperS-320i — HiperS-320i Full Focal Plane Aberration-Free Imaging Spectrometer

Aberration-free imaging corrected spectrometers

HiperS-320i

HiperS-320i Full Focal Plane Aberration-Free Imaging Spectrometer

A 320 mm aberration-corrected imaging spectrograph. An on-axis rotation turret and an automatic focus mirror remove astigmatism across the whole focal plane, so intensity values stay reliable over the full width of the detector rather than only near the centre.

Belangrijkste specificaties (17)▾
Focal length
320 mm
Aperture ratio
f/4.4
Scan range
0–1430 nm
Resolution (PMT)
0.06 nm
Resolution (CCD, 15 µm)
0.12 nm
Dispersion
2.29 nm/mm
Wavelength accuracy
±0.2 nm
Wavelength repeatability
±0.025 nm
Step size
0.005 nm
Stray light
5×10⁻⁵
Focal plane size
29 (w) × 14 (h) mm
Optical axis height
156.3–171.3 mm
Grating size
68 × 68 mm
Grating mount
On-axis triple turret
Slit
0.01–3 mm continuous manual adjustment, motorised optional; height 2, 4 or 14 mm switchable
Dimensions and weight
591 × 460 × 260 mm, 30 kg
Interface
USB 2.0 or RS-232
Bekijk product →Datasheet (pdf)
Omni-iSpecT — Omni-iSpecT High Performance Raman Spectrometer

Ultra-high throughput transmission spectrometers

Omni-iSpecT

Omni-iSpecT High Performance Raman Spectrometer

A transmissive f/2.3 Raman spectrograph built around a volume phase holographic grating and a lens-based optical train rather than mirrors. The high throughput and low focal-plane distortion suit weak Raman signals and fast mapping.

Belangrijkste specificaties (11)▾
Raman shift / wavelength range
0–4100 cm⁻¹ / 532–680 nm (532A1); −200–2400 cm⁻¹ / 770–960 nm (785A1)
Aperture ratio
f/2.3
Focal length (input / output)
85 / 85 mm
Grating
1800 l/mm VPH (532A1); 1200 l/mm VPH (785A1)
CCD detector
Back-illuminated deep depletion, 2000 × 256 pixels, 15 µm pixels, 30 × 3.8 mm image area
Adjustable entrance slit
10 µm – 6 mm
Resolution (typical)
5 cm⁻¹ @ 585 nm (532A1); 3 cm⁻¹ @ 912 nm (785A1), 50 µm slit
Fibre coupling
XY adjustable fibre adaptor; SMA / ferrule 10 mm (532A1), SMA / MPO / ferrule 10 mm (785A1)
Built-in long pass filter
Optional Ø50 mm; 186 cm⁻¹ transition (532A1), 309 cm⁻¹ transition (785A1)
Dimensions (without CCD)
248 × 200 × 118 mm (532A1); 277 × 215 × 118 mm (785A1)
Weight
5 kg (532A1); 5.8 kg (785A1)
Bestelopties (2)▾
  • Omni-iSpecT532A1 — 532 nm excitation, 1800 l/mm VPH, 0–4100 cm⁻¹
  • Omni-iSpecT785A1 — 785 nm excitation, 1200 l/mm VPH, −200–2400 cm⁻¹
Bekijk product →Datasheet (pdf)
Omni-λ300Di / Omni-λ500Di — Double Monochromators and Spectrographs

Double and triple spectrometers

Omni-λ300Di / Omni-λ500Di

Double Monochromators and Spectrographs

Two finely aligned monochromators in series, switchable between additive and subtractive dispersion. Additive mode doubles the effective focal length and resolution; subtractive mode holds the focal length and cuts stray light by two orders of magnitude.

Belangrijkste specificaties (14)▾
Focal length (additive / subtractive)
640 / 320 mm (300Di); 1000 / 500 mm (500Di)
Aperture ratio
f/4.2 (300Di); f/6.5 (500Di)
Resolution (additive / subtractive)
0.04 / 0.08 nm (300Di); 0.025 / 0.05 nm (500Di)
Dispersion (additive / subtractive)
1.15 / 2.29 nm/mm (300Di); 0.75 / 1.49 nm/mm (500Di)
Wavelength accuracy
±0.2 nm
Wavelength repeatability
±0.025 nm
Step size
0.005 nm
Stray light (additive / subtractive)
1×10⁻⁷ / 1×10⁻⁹
Optical axis height
146 mm
Grating size
68 × 68 mm
Turret
Triple grating turret
Slit
Width 0.01–3 mm motorised or manual, height 2, 4 or 14 mm selectable; 24 mm motorised middle slit
Dimensions
825 × 500 × 281 mm (300Di); 825 × 600 × 281 mm (500Di)
Interface
USB 2.0
Bestelopties (2)▾
  • Omni-λ300Di — 320 mm stages, f/4.2, 640 mm additive focal length
  • Omni-λ500Di — 500 mm stages, f/6.5, 1000 mm additive focal length
Bekijk product →Datasheet (pdf)
Omni-λ5008Ti — Triple Monochromator

Double and triple spectrometers

Omni-λ5008Ti

Triple Monochromator

Three finely adjusted imaging monochromators in one instrument. The first two run in subtractive dispersion to suppress stray light and the last two in additive dispersion to build resolution, and the system can be operated as a single, double or triple monochromator.

Belangrijkste specificaties (13)▾
Aperture ratio
f/6.5
Resolution
<1 cm⁻¹ @ 585.25 nm
Low wavenumber limit
<15 cm⁻¹
Dispersion
0.91 nm/mm
Wavelength accuracy
±0.14 nm
Wavelength repeatability
±0.02 nm
Step size
0.0035 nm
Stray light
1×10⁻⁹
Optical axis height
190.5 mm
Grating size
68 × 68 mm
Turret
Triple grating turret
Slit
Width 0.01–3 mm motorised or manual, height 2, 4 or 14 mm selectable; 24 mm motorised middle slit
Interface
USB 2.0
Bekijk product →

Accessoires en systeeminstrumenten

De onderdelen die van een monochromator een werkende meetopstelling maken: ordefilters, vezelkoppeling, monsterkamers, en de chopper-, lock-in-, teller- en acquisitie-elektronica die de detector uitleest.

Diffraction gratings — Gratings for Omni-λ Turrets

Accessories

Diffraction gratings

Gratings for Omni-λ Turrets

The holographic and ruled grating range for the Omni-λ turrets, from 3600 g/mm for deep-UV work down to 50 g/mm reaching 22 µm in the mid-infrared. All catalogued gratings are 68 × 68 mm.

Belangrijkste specificaties (5)▾
Groove densities
3600, 2400, 2000, 1800, 1200, 900, 830, 600, 300, 150, 75, 50 g/mm
Types
Holographic and ruled
Size
68 × 68 mm
Coverage
180 nm (3600 g/mm holographic) to 22 µm (50 g/mm ruled)
Catalogued models
43
Bekijk product →Datasheet (pdf)
SD25 Series — SD25 Series Motorised Filter Wheels

Accessories

SD25 Series

SD25 Series Motorised Filter Wheels

A six-position stepping-motor filter wheel driven straight from the monochromator or spectrograph controller. It holds six 25 mm filters behind a 22 mm clear aperture and is used to block grating higher orders as the instrument scans.

Belangrijkste specificaties (5)▾
Positions
Six, stepping motor controlled
Filter size
25 mm diameter, 22 mm clear aperture
Control
Driven by the Omni-λ monochromator/spectrograph controller and software
Compatibility
SD25 for Omni-λ300i/500i/750i; SD25-R for Omni-λ200i and the SAC-Fluo chamber
Outline
164 × 149 mm
Bestelopties (7)▾
  • SD25 / SD25-R — Supplied without filters — fit any 25 mm filters
  • SD25-IR1 / -IR1-R — 200–1500 nm order-sorting set
  • SD25-IR2 / -IR2-R — 200–2000 nm order-sorting set
  • SD25-IR3 / -IR3-R — 400–3000 nm order-sorting set
  • SD25-IR5 / -IR5-R — 650–5000 nm order-sorting set
  • SD25-IR8 / -IR8-R — 800–8000 nm order-sorting set
  • SD25-IR12 / -IR12-R — 1300–12000 nm order-sorting set
Bekijk product →Datasheet (pdf)
FLG Series — FLG Series Fibres and Fibre Bundles

Accessories

FLG Series

FLG Series Fibres and Fibre Bundles

Quartz fibres and 19-fibre bundles that connect an Omni-λ monochromator or sample chamber to the rest of an optical setup through a BFC series fibre coupler. Single fibres come in UV (200–1100 nm) and IR (350–2000 nm) grades.

Belangrijkste specificaties (7)▾
Single fibre range
200–1100 nm (UV grades); 350–2000 nm (IR grades)
Core diameters
50, 100, 200, 400, 600 µm
Material
Quartz
Numerical aperture
0.22
Divergence (full angle)
25°
Termination
SMA905 standard; FC and others optional
Bundles
19 fibres of 200 µm; 200–1100, 400–1800 or 400–2400 nm depending on model
Bestelopties (5)▾
  • FLG-UV50/100/200/400/600-x — 200–1100 nm quartz single fibres, x = length
  • FLG-IR50/100/200/400/600-x — 350–2000 nm quartz single fibres, x = length
  • FLG-401-x to FLG-409-x — 19-fibre bundles, 200 µm cores, Ø10/13 mm or SMA905 A-end
  • 74-UV — Fibre collimator, UV fused silica, 5 mm lens, SMA905
  • TLS-SMA905-GJ — Fibre focus accessory, UV fused silica, 2 mm focus spot
Bekijk product →Datasheet (pdf)
SAC Series — SAC Series Sample Chambers

Accessories

SAC Series

SAC Series Sample Chambers

Sample chambers that bolt directly to an Omni-λ spectrometer for fluorescence, photoluminescence, transmission, reflection and absorption measurements. The SAC-Fluo uses an f/1 collection design and takes a cryostat as an option.

Belangrijkste specificaties (5)▾
SAC-Fluo collection optics
f/1 design, external laser excitation path, cryostat upgrade optional
Filter mounting
25 / 25.4 mm filters in the collection path
Standard sample holders
Cuvette, SAC-SH15 cuvette holder, SAC-SH11 film holder, SAC-SH12A powder holder
SAC-PL optical path
Reflective, two laser traps; optical axis height 134–170 mm adjustable
Compatibility
SAC-Fluo and SAC-PL require an Omni-λ spectrometer with manual slit
Bestelopties (5)▾
  • SAC-Fluo — Fluorescence sample chamber, f/1 collection, large working space
  • SAC-PL05 — Compact PL chamber, aluminium-coated mirror for UV-VIS-NIR
  • SAC-PL06 — Compact PL chamber, gold-coated mirror for infrared
  • SAC-RF — Transmission and reflection sample chamber
  • SAC-FT — Transmission and absorption sample chamber
Bekijk product →Datasheet (pdf)
DCS540 — DCS540 Optical Chopper System

Accessories

DCS540

DCS540 Optical Chopper System

A chopper controller and blade set for lock-in detection. Six blades cover 1 Hz to 5 kHz, and a two-frequency blade provides separate input and output chopping for pump-probe style experiments.

Belangrijkste specificaties (9)▾
Frequency resolution
0.01 Hz
Frequency stability
250 ppm/°C typical
Frequency drift
<1%
Operating temperature
10–40 °C
Display
2.4 inch 320 × 240 LCD, 6-digit frequency readout
Input / output
BNC, standard TTL/CMOS; input 0–5 V, high >3.6 V, low <0.4 V, min load 500 Ω
Interface
RS232 to USB; all functions controllable over USB
Power
220 VAC ±10%, 50 Hz ±0.2 Hz, <30 W
Dimensions
206 (w) × 150 (d) × 70 (h) mm
Bestelopties (6)▾
  • DCS540-01 — 2-slot blade, 1–99 Hz
  • DCS540-02 — 10-slot blade, 20 Hz – 1 kHz (standard)
  • DCS540-03 — 15-slot blade, 30 Hz – 1.5 kHz (standard)
  • DCS540-04 — 30-slot blade, 60 Hz – 3 kHz (standard)
  • DCS540-05 — 60-slot blade, 120 Hz – 5 kHz
  • DCS540-06 — Two-frequency blade, in 5 slot / out 7 slot: 10–500 Hz in, 14–700 Hz out
Bekijk product →Datasheet (pdf)
DCS500PA — DCS500PA High Performance Lock-in Amplifier

Accessories

DCS500PA

DCS500PA High Performance Lock-in Amplifier

A digital lock-in amplifier covering 50 mHz to 120 kHz with low-noise voltage and current inputs, up to 100 dB dynamic reserve and time constants from 10 µs to 30 s.

Belangrijkste specificaties (17)▾
Frequency range
50 mHz to 120 kHz
Full-scale sensitivity
1 nV to 1 V in a 1-2-5 sequence
Voltage input mode
Single-ended or differential
Voltage input impedance
10 MΩ // 25 pF, AC or DC coupled
Current input
10⁶ or 10⁸ V/A, 1 kΩ to virtual ground
Noise
10 nV/√Hz at 1 kHz; 0.13 pA/√Hz at 1 kHz; 0.013 pA/√Hz at 100 Hz
Dynamic reserve
>100 dB
CMRR
>100 dB to 10 kHz, decreasing by 6 dB/octave
Gain accuracy
0.2% typical, 1% max
Phase resolution
0.01° increments; absolute <1°, relative <0.01°
Time constants
10 µs to 3 ks (<200 Hz); 10 µs to 30 s (>200 Hz), 6/12/18/24 dB/oct
Harmonic rejection
−90 dB
Internal oscillator
50 mHz–120 kHz, 25 ppm + 30 µHz accuracy, 1 mHz resolution
Display
3.5 inch 320 × 240 TFT, four channels showing X, Y, R and θ
Interfaces
RS232 and RS232-to-USB; fully remote controllable
Power
220/240 VAC, 50/60 Hz, 30 W
Dimensions and weight
259 (w) × 320 (d) × 115 mm with feet, 3.2 kg
Bekijk product →Datasheet (pdf)
DCS300PA — DCS300PA Data Acquisition System

Accessories

DCS300PA

DCS300PA Data Acquisition System

A dual-channel weak-signal pre-amplifier and acquisition unit, and the successor to the DCS103. The added multi-position high-gain pre-amplifier is what makes it suitable for low-level detector signals.

Belangrijkste specificaties (14)▾
Analog input channels
2, 16-bit A/D
Voltage input range
±1 mV to ±10 V
Voltage gain
10⁰–10⁴
Current gain
10³–10⁷
AUX measurement range
DC 0–10 V
Analog output
2 channels, 12-bit D/A, DC 0–10 V
Temperature measurement
1 channel, AD590 probe, −30 to 100 °C
Integration time
10 µs to 10 s
Data points
≤2000, stored in RAM
Triggering
Software and external trigger; TTL rising edge input
I/O
5 input, 2 TTL output
Interface
USB 2.0
Power
AC 100–240 V, 50/60 Hz (DC 24 V, 0.3 A)
Dimensions and weight
260 × 260 × 120 mm, 3.3 kg
Bekijk product →Datasheet (pdf)
DCS210PC — DCS210PC Photon Counter

Accessories

DCS210PC

DCS210PC Photon Counter

A single-photon counter with a chopper control function and a lifetime measurement mode, plus analog input and output channels so it can act as the acquisition hub of an Omni-λ system.

Belangrijkste specificaties (10)▾
Photon counting
1 channel, 100 Mcps count rate
Analog inputs
3 channels, 0–10 V, 16-bit A/D
Analog output
1 channel, 0–10 V, 12-bit D/A
Triggering
External TTL-compatible trigger input, plus software trigger
Chopping mode
Chopper control to improve signal-to-noise ratio
Lifetime measurement
Range 10 µs to 10 s; instrument response width 1 µs
Interface
USB
Dimensions
240 × 240 × 120 mm
Power
AC 110 V / 220 V
Weight
3.4 kg
Bekijk product →Datasheet (pdf)
Scanning software — CCD and Scanning Software

Accessories

Scanning software

CCD and Scanning Software

Instrument control and acquisition software for the Omni-λ range, covering both scanning monochromator operation and CCD spectrograph readout.

Belangrijkste specificaties (2)▾
Scope
Instrument control and spectral data acquisition
Instruments
Omni-λ monochromators and spectrographs, and the matching CCD detectors
Bekijk product →Datasheet (pdf)

Hulpmiddelen

Stel de rest van het systeem samen

1

Poort- & spleetbouwer

Kies in- en uitgangspoorten, coatings en spleten, en krijg de modelcode terug.

Open →2

Tralierevolver-planner

Vul twee of drie revolversleuven en controleer de spectrale dekking.

Open →3

Volledige catalogus

Elke monochromator, tralie, spleet, sluiter, flens en accessoire voor aanvraag.

Open →

Hoe het werkt

Eén ontwerp, twee instrumenten

Licht komt binnen via een spleet, een gebogen spiegel collimeert het, en een tralie scheidt het naar hoek. Een tweede spiegel focusseert het resultaat. Wat aan de uitgang zit bepaalt wat u heeft.

Als monochromator

Een smalle uitgangsspleet laat één golflengteband tegelijk door. Het draaien van de tralie stemt deze af — een scannende, afstembare bron.

Als spectrograaf

Een cameraflens vervangt de uitgangsspleet en het hele gespreide spectrum landt in één keer op een CCD- of sCMOS-array.

De tralie bepaalt het bereik

De brandpuntsafstand bepaalt hoever het spectrum zich spreidt; de tralie bepaalt waar het ligt en hoe efficiënt. Revolvers houden er twee of drie, zodat u van UV naar NIR schakelt zonder het instrument te openen.

Niet zeker welke configuratie u nodig heeft?

Stuur ons de meting — monster, golflengtebereik, detector en de gewenste resolutie — en wij komen terug met een configuratie en een offerte.

Spreek een specialist

Before you specify

Gidsen voor de spectrale keten

Hoe brandpuntsafstand, tralie, spleet en detector met elkaar concurreren in complete spectroscopiesystemen.

All guides
Optical bench layout of a fluorescence spectrometer showing excitation source, cuvette sample chamber, emission spectrograph and detectors
Spectroscopy
22 min Interactive design lab

How to Design a Fluorescence Spectrometer: Source, Filters, Monochromator & Detector

Translate fluorophore bands, Stokes shift, and sample state into a defensible excitation source, optical filters, collection geometry, monochromator, and detector architecture.

Open guide
The same spectral doublet recorded through 200, 320, and 750 mm spectrographs
Spectroscopy
13 min Bandpass lab

How to choose a spectrograph

Focal length, grating, and slit are one decision: how finely to spread the spectrum and how much light to pay for it. Watch a doublet merge and split through real Omni-λ dispersion numbers.

Open guide
Ultrafast laser beams passing through mirrors and lenses on a darkened optical table
Ultrafast spectroscopy
18 min System lab

Building a pump–probe spectroscopy system

Design the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.

Open guide