Back to Home

Planetary

G3CMOS10300KPA

ToupTek G3CMOS10300KPA is a planetary astronomy camera using the IMX294 sensor, with 11.6 MP (4128 × 2808), 4.63 µm pixels and 33 fps. Designed for planetary lucky imaging, lunar surface imaging, one-shot colour planetary imaging. Available from Precisometer for professional astronomy systems.

Sensor
Sony IMX294 color CMOS
Sensor Type
Back-illuminated 4/3-inch color CMOS
Resolution
11.6 MP (4128 × 2808)
Pixel Size
4.63 µm
Frame Rate
33 fps
Interface
USB 3.0
G3CMOS10300KPA

Application context

Why this design is used

Choose the G3CMOS10300KPA when 33 fps acquisition, 4.63 µm sampling and the IMX294 sensor match your telescope's focal length and seeing conditions.

Planetary lucky imaging

33 fps capture supports frame selection and stacking for Jupiter, Saturn, Mars and Venus.

Lunar surface imaging

4.63 µm pixels and 11.6 MP (4128 × 2808) resolution support detailed lunar mosaics and close-up imaging.

One-shot colour planetary imaging

The colour IMX294 sensor provides a direct RGB workflow for planets and the Moon.

Solar imaging with approved filtration

Can be used for solar capture only with an appropriate certified solar filter and safe observing setup.

Specifications

G3CMOS10300KPA

25 specification rows

The G3CMOS10300KPA is an astronomy camera in the G3CMOS planetary series, built around a Sony IMX294 color CMOS sensor, 11.6 MP (4128 × 2808) resolution, 4.63 µm pixels, frame rates up to 33 fps, a USB 3.0 interface. It suits planetary where reliable imaging performance and interface compatibility matter.

Sensor & Imaging

ModelG3CMOS10300KPA
StatusCurrent
ApplicationPlanetary
SensorSony IMX294 color CMOS
Sensor TypeBack-illuminated 4/3-inch color CMOS
Sensor Size4/3-inch, 19.11 × 13.0 mm
Resolution11.6 MP (4128 × 2808)
Pixel Size4.63 µm
Shutter TypeRolling shutter

Performance

Frame Rate33 fps
ADC14-bit
Peak QE>80%
Dynamic Range84.4 dB
Read Noise4.1–3.38 e⁻
Full Well64 ke⁻
Spectral Range380–690 nm

Interface & Thermal

InterfaceUSB 3.0
MountAstronomy adapter / telescope interface
CoolingAir-cooled

Additional Published Specifications

Sensor Diagonal23.1mm
Maximum SNR48dB
Frame Buffer512MB
Back Focal Distance17.5mm
Protective WindowIR/AR
Color Filter ArrayRGGB

Technical media

Performance graphs and technical drawings

Official sensor-response, performance, and mechanical imagery for the G3CMOS10300KPA.

G3CMOS10300KPA Planetary Camera
G3CMOS10300KPA Planetary Camera
G3CMOS10300KPA Planetary Camera
G3CMOS10300KPA Planetary Camera
G3CMOS10300KPA Planetary Camera
G3CMOS10300KPA Planetary Camera

System integration

Integration and compatibility

Use these checks to connect G3CMOS10300KPA to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Lens and microscope interface
Mount: Astronomy adapter / telescope interface
Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.
Sensor and sampling
Sensor: Sony IMX294 color CMOS · Sensor Type: Back-illuminated 4/3-inch color CMOS
Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.
Interface and data rate
Frame Rate: 33 fps · Interface: USB 3.0
Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.
Cooling and noise floor
Dynamic Range: 84.4 dB · Read Noise: 4.1–3.38 e⁻
Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Technical FAQ

Integration questions for G3CMOS10300KPA

What lens mount is required for the G3CMOS10300KPA?

Mount: Astronomy adapter / telescope interface. Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.

What sensor and pixel pitch does the G3CMOS10300KPA use?

Sensor: Sony IMX294 color CMOS · Sensor Type: Back-illuminated 4/3-inch color CMOS. Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.

How does the G3CMOS10300KPA connect to the acquisition computer?

Frame Rate: 33 fps · Interface: USB 3.0. Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.

What is the noise performance of the G3CMOS10300KPA?

Dynamic Range: 84.4 dB · Read Noise: 4.1–3.38 e⁻. Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Need help choosing?

Tell us your sensor, resolution, spectral range, frame-rate, interface, and software requirements and we will confirm the matching configuration and lead time.

Open camera finder

Model selection

Nearby series comparison

Compare G3CMOS10300KPA with the closest available models in the G3CMOS planetary family.

Selection parameterG3CMOS10300KPA (current)G3CMOS08300KPAG3CMOS20000KMA
SensorSony IMX294 color CMOSSony IMX585 color CMOSSony IMX183 monochrome CMOS
Resolution11.6 MP (4128 × 2808)8.3 MP (3840 × 2160)19.8 MP (5440 × 3648)
Sensor size4/3-inch, 19.11 × 13.0 mm1/1.2-inch, 11.2 × 6.3 mm1-inch, 13.06 × 8.76 mm
Pixel size / frame rate4.63 µm2.9 µm2.4 µm

Other cameras on the IMX294 sensor

The IMX294 appears in 9 models across the catalogue, differing in cooling, shutter, interface and colour filter. Compare them side by side before settling on a variant.