Back to Home

Sony image sensor

IMX294 cameras

7 camera models built on the Sony IMX294 sensor, covering industrial & analytical cameras, microscopy cameras and low-light & cooled cameras. Compare resolution, pixel size, frame rate and interface, then request a quotation from Precisometer.

Datasheet variants in this range

IMX294 (C) · Sony IMX294CJK

Models

Cameras using the IMX294

ModelSensor variantResolutionPixel SizeFrame RateShutter TypeInterface
BIGEYE10000KPAIndustrial & Analytical CamerasIMX294 (C)10.3 MP (4096×2160)4.63 µm × 4.63 µm30 fps @ 3704×2778; 34.5 fps @ 4096×2160; 39.5 fps @ 2760×2072; 62 fps @ 2048×1080; 86 fps @ 1360×720Rolling ShutterUSB3.0
E3ISPM08000KPAMicroscopy CamerasIMX294 (C)8M (2808×2808)4.63 µm × 4.63 µm30 fps @ 2808×2808(14-bit); 139 fps @ 1392×1392; 139 fps @ 696×696Rolling ShutterUSB3.0
E3ISPM32000KPAMicroscopy CamerasIMX294 (C)32M (5600×5600)2.315 µm × 2.315 µm8.1 fps @ 5600×5600; 30.0 fps @ 2800×2800; 30.0 fps @ 1400×1400Rolling ShutterUSB3.0
E3ISPM45000KPAMicroscopy CamerasIMX294 (C)45M (8176×5616)2.315 µm × 2.315 µm8.1 fps @ 8176×5616; 30.0 fps @ 4088×2808; 8.1 fps @ 7408×5556; 33.0 fps @ 4088×2808; 10.4 fps @ 8176×4320; 34.7 fps @ 4096×2160; 62.5 fps @ 2048×1080; 86.5 fps @ 1344×720Rolling ShutterUSB3.0
ITR3CMOS10300KPALow-Light & Cooled CamerasSony IMX294CJK10.3MP (4128×2808)4.63 µm × 4.63 µm30.0 fps @ 4128×2808; 38.5 fps @ 4096×2160; 59.8 fps @ 2048×1080; 87.2 fps @ 1360×720Rolling ShutterUSB3.0
IUA10300KPAIndustrial & Analytical CamerasSony IMX294CJK10.3MP (4128×2808)2.315 µm × 2.315 µm30.0 fps @ 4128×2808; 38.5 fps @ 4096×2160; 59.8 fps @ 2048×1080; 87.2 fps @ 1360×720Rolling ShutterUSB3.0 (USB3.1 GEN1)
MTR3CMOS10300KPALow-Light & Cooled CamerasIMX294 (C)10.3MP (4128×2808)4.63 µm × 4.63 µm30 fps @ 4128×2808; 38.5 fps @ 4096×2160; 59.8 fps @ 2048×1080; 87.2 fps @ 1360×720Rolling ShutterUSB3.0

Not sure which IMX294 variant you need?

Monochrome or colour, global or rolling shutter, cooled or uncooled, and the interface all change what this sensor can do in your setup. Tell us the measurement and we will confirm the matching configuration and lead time.