Laser Diodes & Sources
450-2200nm Tunable Laser Single Mode Fiber Coupled
The SUTL is a fiber-coupled, single-mode tunable laser delivering up to 0.5 mW per 0.7 nm linewidth peak with more than 5 W of average power across an ultra-broad spectral range of 450–2200 nm. It offers power stability (<0.5% RMS) and is based on a supercontinuum laser platform operating at repetition rates up to 4 MHz. Wavelength tunability is achieved via a fiber-optic tunable filter providing a typical 200 nm tuning range, extendable using multiple filters. The single-mode output exhibits minimal polarization dependence, while the polarization-maintaining (PM) configuration delivers highly stable polarized light with an extinction ratio up to 35 dB. The standard configuration provides free-space output through a photonic crystal fiber (PCF) terminated with a fused glass core endface to prevent damage.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: SUTL-101211111
Config: Q-Switch · Wavelength Range: 1300-1600nm · Linewidth: 2nm · Power: 0.1mW · Tunning Method: Manual · Output: Free Space · Connector: None
System integration
Integration and compatibility
Use these checks to connect 450-2200nm Tunable Laser Single Mode Fiber Coupled to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Connector: None, FC/PC, FC/APC, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength Range: 1300-1600nm, 1280-1760nm, 1900-2200nm, 850-1100nm, 650-850nm, 400-650nm, 1310-2200nm, 1280-2200nm, 900-2200nm
- Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 450-2200nm Tunable Laser Single Mode Fiber Coupled
Which fiber and connector does the 450-2200nm Tunable Laser Single Mode Fiber Coupled use?
Connector: None, FC/PC, FC/APC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 450-2200nm Tunable Laser Single Mode Fiber Coupled be included in an optical power budget?
Wavelength Range: 1300-1600nm, 1280-1760nm, 1900-2200nm, 850-1100nm, 650-850nm, 400-650nm, 1310-2200nm, 1280-2200nm, 900-2200nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 450-2200nm Tunable Laser Single Mode Fiber Coupled with the closest available models in the Laser Diodes & Sources family.
| Selection parameter | 450-2200nm Tunable Laser Single Mode Fiber Coupled (current) | 405nm MM Fiber Coupled Laser | 450nm Butterfly Laser Diode |
|---|---|---|---|
| Wavelength range | 1300-1600nm, 1280-1760nm, 1900-2200nm, 850-1100nm, 650-850nm, 400-650nm, 1310-2200nm, 1280-2200nm, 900-2200nm | 405nm | 450nm |
| Connector / control | None, FC/PC, FC/APC, Special | Non, FC/APC, FC/PC, SC/PC, SC/APC, LC/PC, LC/UPC, Special | FC/APC, Special |
