Laser Diodes & Sources
The FCMH series diode lasers deliver 2W of power through a 50/125µm fiber. They provide high brightness and simplified thermal management by distributing the diodes (heat sources), allowing for a water-cooled architecture with reliable, predictable performance. A turn-key benchtop unit is available, integrating the power supply, water cooling, power control, and safety shut-off features.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: FCMH-66002AA121
Wavelength: 660nm · Output Power: 2W · Package: A · Fiber Type: 50/125 μm · Fiber Buffer: 0.9mm Tube · Fiber Length: 1m · Connector: Non
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Fiber Coupled High Power Multimode Laser - 660nm (2W): Laboratory optical integration depends on preserving the optical budget through the complete path. The 660nm wavelength specification sets source and detector compatibility. The fiber/interface entry (50/125 μm, 200 µm) must match the connected components.
Fiber Coupled High Power Multimode Laser - 660nm (2W): Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 660nm wavelength specification sets source and detector compatibility. The fiber/interface entry (50/125 μm, 200 µm) must match the connected components.
System integration
Use these checks to connect Fiber Coupled High Power Multimode Laser - 660nm (2W) to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: 50/125 μm, 200 µm · Fiber Buffer: 0.9mm Tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 660nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Fiber Coupled High Power Multimode Laser - 660nm (2W) with the closest available models in the Laser Diodes & Sources family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Fiber Coupled High Power Multimode Laser - 660nm (2W) (current) | Fiber Coupled High Power DFB Laser 1550nm | Fiber Coupled High Power Multimode Laser - 793-808nm |
|---|---|---|---|
| Wavelength range | 660nm | 1550nm | 793nm, 808nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | 50/125 μm, 200 µm | SM28, PM1550, PM1310 | 200 µm |
| Connector / control | Non, SMA | Non, FC/APC, Special | Non, SMA |
