Transmitters & Receivers
The FORX Photoreceiver is designed for high-speed and high sensitivity analog and digital applications, featuring a high bandwidth PIN photodiode and a linear preamplifier within a hermetically sealed coaxial package. The module incorporates a highly stable optical coupling system. Its low input-referred noise ensure exceptional linearity and precision. For added convenience, We offer a driving PCB for easy integration and a metal box protective package to safeguard against ESD in laboratory environments, both come with a specially designed low noise power supply. Due to their high sensitivity to electrostatic discharge, warranty coverage applies only to fully metal covered modules the benchtops, which include proper protection. Other versions of the lasers and photodetectors are not covered by any warranty. Please use them with great caution.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Detector Type: PIN · Wavelength Range: 1300-1600nm · Bandwidth: 8GHz · Package: Device · Configuration: Standard · Connector: Non
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
8GHz Fiber Optical Amplified InGaAs PIN Photodetector: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1300-1600nm wavelength specification sets source and detector compatibility. The fiber/interface entry (Non, FC/PC, FC/APC) must match the connected components.
8GHz Fiber Optical Amplified InGaAs PIN Photodetector: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1300-1600nm wavelength specification sets source and detector compatibility. The fiber/interface entry (Non, FC/PC, FC/APC) must match the connected components.
System integration
Use these checks to connect 8GHz Fiber Optical Amplified InGaAs PIN Photodetector to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Connector: Non, FC/PC, FC/APC. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength Range: 1300-1600nm. Check the Transmitters & Receivers passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare 8GHz Fiber Optical Amplified InGaAs PIN Photodetector with the closest available models in the Transmitters & Receivers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | 8GHz Fiber Optical Amplified InGaAs PIN Photodetector (current) | 850nm Multimode Fiber Optical Amplified Photodetector / Photoreceiver | DFB Butterfly Fiber Optic Transmitter 3GHz |
|---|---|---|---|
| Wavelength range | 1300-1600nm | Confirm for this model | 1550.32 |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | SM28, PM1550, Special |
| Connector / control | Non, FC/PC, FC/APC | Confirm for this model | FC/APC, FC/PC, Non, SC/PC, SC/APC, LC/PC, LC/UPC, Special |
