Fiber Optic Communication Data Links
EDFA Amplifiers (OPA, OBA) 1528-1565nm
EDFA is an erbium-doped fiber amplifier. It is used to amplify the optical power up to 48 channels (channel interval of 100 GHz) or 96 channels (channel interval of 50 GHz) at the C band at the same time in the transmission link. It has characteristics of flat gain, stable output, low noise figure, etc. It is mostly used in DWDM high-speed and long-haul transmission. These Erbium-Doped Fiber Amplifiers (EDFAs) are engineered for a long operational lifespan, typically designed to function reliably for over 10 years. This durability is achieved through high-quality components and robust manufacturing processes. The design considerations include thermal management, component selection, and rigorous testing to maximize the amplifier’s longevity and efficiency.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Configure: Pluggable · Type: Booster · Gain: 17dB · Output Power: 17dBm · Connector: LC/PC · Rack: Non
System integration
Integration and compatibility
Use these checks to connect EDFA Amplifiers (OPA, OBA) 1528-1565nm to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Connector: LC/PC, LC/APC, FC/PC, FC/APC
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Technical FAQ
Integration questions for EDFA Amplifiers (OPA, OBA) 1528-1565nm
Which fiber and connector does the EDFA Amplifiers (OPA, OBA) 1528-1565nm use?
Connector: LC/PC, LC/APC, FC/PC, FC/APC. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
