Laser Diodes & Sources

988nm PUMP Laser

The PUML series fiber-coupled laser diodes are FP-type lasers specifically designed for pumping doped fibers in EDFAs. These diodes deliver high output power and include a built-in photodiode for precise monitoring and feedback control of the laser’s output power. Encased in standard butterfly packages with TEC cooling, they are pigtailed to a 1-meter single-mode fiber terminated with an FC/APC connector. Each unit undergoes rigorous testing to ensure reliability and is available in both single-mode (SM) and polarization-maintaining (PM) fiber-coupled versions. Additionally, we offer a cost-effective, high-performance feedback control laser/TEC driver kit that maintains constant and adjustable output power, along with an externally cooled mounting fixture to stabilize the output wavelength. It is available in module or benchtop.

Configure & add to enquiry Datasheet (PDF)Back to Laser Diodes & Sources

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

WavelengthPowerMonitorTEC CoolingPackageFiber TypeFiber BufferFiber LengthConnector

Part number: PUML-0988112F2121

Wavelength: 988nm · Power: 150mW · Monitor: Yes · TEC Cooling: Yes · Package: 14-pin · Fiber Type: Hi1060 · Fiber Buffer: Bare · Fiber Length: 0.5m · Connector: None

Downloads

Datasheets & documents

980nm Pump FP Butterfly Laser

System integration

Integration and compatibility

Use these checks to connect 988nm PUMP Laser to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber: Fiber Type: Hi1060, PM980 · Fiber Buffer: Bare, 900um Loose Tube; Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength and loss budget: Wavelength: 988nm, 976nm; Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Technical FAQ

Integration questions for 988nm PUMP Laser

Which fiber and connector does the 988nm PUMP Laser use?

Fiber Type: Hi1060, PM980 · Fiber Buffer: Bare, 900um Loose Tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

How should the 988nm PUMP Laser be included in an optical power budget?

Wavelength: 988nm, 976nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.