Laser Diodes & Sources
915nm Butterfly Laser Diode - 300mW
The 915nm series laser diodes are fabricated in a hermetically sealed 14-pin butterfly package. The laser diodes contain a monitor photodiode, thermoelectric cooler (TEC), and a thermistor to secure high-quality laser performance. Our laser products are Telcordia GR-468 qualified and in compliance with RoHS Directives. A matching driver is available in either a compact module or benchtop turn-key unit. Single mode Fabry Perot (FP) laser. CW or pulsed operation, 0.5ns rise time. Low threshold current and high slope efficiency Operating temperature range -40°C to +50°C. Wavelength/temperature coefficient 0.3nm/°C Built-in monitor photodiode, thermo-electric cooler and thermistor. Single mode fiber pigtail (Corning HI780). Optional FC/PC or FC/APC connectors.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: FLBF-09153017313
Wavelength: 915nm · Output Power: 300mW · PD: None · Fiber Type: Hi780 · Fiber Buffer: 900µm Tube · Fiber Length: 0.5m · Connector: FC/APC
Downloads
Datasheets & documents
System integration
Integration and compatibility
Use these checks to connect 915nm Butterfly Laser Diode - 300mW to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: Hi780, SM800, PM780, PM850, PM980 · Fiber Buffer: 900µm Tube
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 915nm
- Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 915nm Butterfly Laser Diode - 300mW
Which fiber and connector does the 915nm Butterfly Laser Diode - 300mW use?
Fiber Type: Hi780, SM800, PM780, PM850, PM980 · Fiber Buffer: 900µm Tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 915nm Butterfly Laser Diode - 300mW be included in an optical power budget?
Wavelength: 915nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 915nm Butterfly Laser Diode - 300mW with the closest available models in the Laser Diodes & Sources family.
| Selection parameter | 915nm Butterfly Laser Diode - 300mW (current) | 905nm Fiber Coupled FP Laser Source - 20mW | 915nm Fiber Coupled FP Laser Source - 300mW |
|---|---|---|---|
| Wavelength range | 915nm | 905nm | 915nm |
| Fiber type | Hi780, SM800, PM780, PM850, PM980 | Hi780, SM800, PM780, PM850 | Hi780, SM800, PM780, PM850, PM980 |
| Connector / control | FC/APC, Special | Non, FC/APC, FC/PC, Special | Non, FC/APC, FC/PC, Special |
