Laser Diodes & Sources
775nm Butterfly Laser Diode - 10mW
The 775nm series laser diodes are fabricated in a hermetically sealed 14-pin butterfly package. The laser diodes contain a monitor photodiode, thermoelectric cooler (TEC), and a thermistor to secure high-quality laser performance. Our laser products are Telcordia GR-468 qualified and in compliance with RoHS Directives. A matching driver is available in either a compact module or benchtop turn-key unit. Fabry Perot single mode laser. CW or pulsed operation. Operating temperature range -10°C to +70°C. Wavelength/temperature coefficient 0.2nm/°C Built-in monitor photodiode, thermo-electric cooler, and thermistor. Single mode (Corning HI780, NA=0.14, MFD=4.5um@780nm, 5um@850nm) or polarization maintaining (PM) fiber pigtail. Optional FC/PC or FC/APC connector.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: FLBF-07750117313
Wavelength: 785nm · Output Power: 10mW · PD: None · Fiber Type: Hi780 · Fiber Buffer: 0.9mm Tube · Fiber Length: 0.5m · Connector: FC/APC
Downloads
Datasheets & documents
System integration
Integration and compatibility
Use these checks to connect 775nm Butterfly Laser Diode - 10mW to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: Hi780, PM780 · Fiber Buffer: 0.9mm Tube
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 785nm
- Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 775nm Butterfly Laser Diode - 10mW
Which fiber and connector does the 775nm Butterfly Laser Diode - 10mW use?
Fiber Type: Hi780, PM780 · Fiber Buffer: 0.9mm Tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 775nm Butterfly Laser Diode - 10mW be included in an optical power budget?
Wavelength: 785nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 775nm Butterfly Laser Diode - 10mW with the closest available models in the Laser Diodes & Sources family.
| Selection parameter | 775nm Butterfly Laser Diode - 10mW (current) | 730nm Fiber Coupled FP Laser Source - 20mW | 775nm Fiber Coupled FP Laser Source - 10mW |
|---|---|---|---|
| Wavelength range | 785nm | 730nm | 775nm |
| Fiber type | Hi780, PM780 | Hi780, PM780 | Hi780, PM780 |
| Connector / control | FC/APC, Special | Non, FC/APC, FC/PC, Special | Non, FC/APC, FC/PC, Special |
