Laser Diodes & Sources
660nm Fiber Coupled FP Laser Source - 100mW
We provide cost-effective fiber-coupled laser sources with a wide range emitting spectrum from 370nm to 2000nm and line width from 10kHz to broadband to select. Each benchtop laser source features a pigtailed laser and high-precision, low-noise auto-feedback drive electronics to ensure constant output power or a constant driving current, and an integrated temperature control unit maintains optimal operating conditions. Each unit features a front fiber output connector and a universal power supply compatible with 100 to 240 VAC. We offer two packages: benchtop for ease of use and compact module for system integration. The user interface benchtop includes an intuitive LCD display for independent control of output power and temperature via two front rotating knobs. The module has two front output power and temperature settings.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 660nm · Power: 100mW · Linewidth: 2nm · Package: Benchtop · Isolator: None · Control Mode: Constant Current · TEC Cooling: No · Fiber Type: SM450 · Connector: Non
System integration
Integration and compatibility
Use these checks to connect 660nm Fiber Coupled FP Laser Source - 100mW to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SM450, SM600, PM460, PM630 · Connector: Non, FC/APC, FC/PC, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 660nm
- Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
- Control interface
- Control Mode: Constant Current, Constant Power
- Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.
Technical FAQ
Integration questions for 660nm Fiber Coupled FP Laser Source - 100mW
Which fiber and connector does the 660nm Fiber Coupled FP Laser Source - 100mW use?
Fiber Type: SM450, SM600, PM460, PM630 · Connector: Non, FC/APC, FC/PC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 660nm Fiber Coupled FP Laser Source - 100mW be included in an optical power budget?
Wavelength: 660nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Does the 660nm Fiber Coupled FP Laser Source - 100mW require a controller?
Control Mode: Constant Current, Constant Power. Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 660nm Fiber Coupled FP Laser Source - 100mW with the closest available models in the Laser Diodes & Sources family.
| Selection parameter | 660nm Fiber Coupled FP Laser Source - 100mW (current) | 660nm Fiber Coupled FP Laser - 80mW | 660nm Fiber Coupled FP Laser Source - 10mW |
|---|---|---|---|
| Wavelength range | 660nm | 660nm | 660nm |
| Fiber type | SM450, SM600, PM460, PM630 | SM450, SM600, PM460, PM630 | SM450, SM600, PM460, PM630 |
| Connector / control | Non, FC/APC, FC/PC, Special | Non, FC/APC, FC/PC, Special | Non, FC/APC, FC/PC, Special |
