Laser Diodes & Sources
The FPF series fiber-coupled laser diodes are designed with a GaAs quantum well structure integrated with a grating configuration. These diodes feature a built-in photodiode for precise monitoring and feedback control of the laser’s output power. Housed in standard TO packages, these diodes are pigtailed to a 1-meter long single-mode fiber terminated with an FC/APC connector. Each unit undergoes rigorous testing prior to shipment to ensure reliability. Additionally, we offer a cost-effective, high-performance feedback control driver kit that maintains constant and adjustable output power, along with an externally cooled mounting fixture to stabilize the output wavelength. It is available in module or benchtop. Due to their high sensitivity to electrostatic discharge, warranty coverage applies only to fully metal covered modules the benchtops, which include proper protection.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 1550nm · Power: 0.2mW · Package: Type A · Fiber Type: SM28 · Fiber Buffer: 0.9mm Tube · Fiber Length: 1.0 m · Connector: Non
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Fiber Coupled FP Laser 1310nm,1550nm: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1550nm, 1310nm wavelength specification sets source and detector compatibility. The fiber/interface entry (SM28, PM1550, PM1310) must match the connected components.
Fiber Coupled FP Laser 1310nm,1550nm: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1550nm, 1310nm wavelength specification sets source and detector compatibility. The fiber/interface entry (SM28, PM1550, PM1310) must match the connected components.
System integration
Use these checks to connect Fiber Coupled FP Laser 1310nm,1550nm to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: SM28, PM1550, PM1310 · Fiber Buffer: 0.9mm Tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1550nm, 1310nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Fiber Coupled FP Laser 1310nm,1550nm with the closest available models in the Laser Diodes & Sources family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Fiber Coupled FP Laser 1310nm,1550nm (current) | Diode/TEC Controller | Fiber Coupled High Power DFB Laser 1310nm |
|---|---|---|---|
| Wavelength range | 1550nm, 1310nm | Confirm for this model | 1310nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | SM28, PM1550, PM1310 | Confirm for this model | SM28, PM1550, PM1310 |
| Connector / control | Non, FC/APC, Special | Confirm for this model | Non, FC/APC, Special |
