Transmitters & Receivers
High sensitivity optical receiver module including PIN diode, low noise TIA and limiting amplifier. Low power consumption. Output interface with coaxial connector. Non-inverted, single-end AC-couple output. Due to their high sensitivity to electrostatic discharge, warranty coverage applies only to fully metal covered modules the benchtops, which include proper protection. Other versions of the lasers and photodetectors are not covered by any warranty. Please use them with great caution.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Detector Type: PIN · Wavelength Range: 1200-1600nm · Bandwidth: 10GHz · Amplifier: Dual Stage · Module: Non · Configuration: Standard · Connector: FC/PC
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
10GHz High Sensitivity Fiber Optical Amplified Photodetector / Photoreceiver: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1200-1600nm wavelength specification sets source and detector compatibility. The fiber/interface entry (FC/PC, FC/APC, Special) must match the connected components.
10GHz High Sensitivity Fiber Optical Amplified Photodetector / Photoreceiver: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1200-1600nm wavelength specification sets source and detector compatibility. The fiber/interface entry (FC/PC, FC/APC, Special) must match the connected components.
System integration
Use these checks to connect 10GHz High Sensitivity Fiber Optical Amplified Photodetector / Photoreceiver to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Connector: FC/PC, FC/APC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength Range: 1200-1600nm. Check the Transmitters & Receivers passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare 10GHz High Sensitivity Fiber Optical Amplified Photodetector / Photoreceiver with the closest available models in the Transmitters & Receivers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | 10GHz High Sensitivity Fiber Optical Amplified Photodetector / Photoreceiver (current) | 12 GHz LN Fiber Optical Transmitter/Converter – Turnkey | 12 GHz Plug-Play Electro-Absorption Modulated Fiber Optical Transmitter |
|---|---|---|---|
| Wavelength range | 1200-1600nm | C-Band, L-Band, 1550 nm, 1551.11 nm, 1562.22 nm, Tunable ITU Laser | 1550nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | SM28 |
| Connector / control | FC/PC, FC/APC, Special | FC/APC, FC/UPC, Special | FC/APC |
