Back to Home

Planetary

G3CMOS20000KMA

ToupTek G3CMOS20000KMA is a planetary astronomy camera using the IMX183 sensor, with 19.8 MP (5440 × 3648), 2.4 µm pixels and 30 fps. Designed for planetary lucky imaging, lunar surface imaging, narrowband and near-infrared imaging. Available from Precisometer for professional astronomy systems.

Sensor
Sony IMX183 monochrome CMOS
Sensor Type
Back-illuminated monochrome CMOS
Resolution
19.8 MP (5440 × 3648)
Pixel Size
2.4 µm
Frame Rate
30 fps
Interface
USB 3.0
G3CMOS20000KMA

Application context

Why this design is used

Choose the G3CMOS20000KMA when 30 fps acquisition, 2.4 µm sampling and the IMX183 sensor match your telescope's focal length and seeing conditions.

Planetary lucky imaging

30 fps capture supports frame selection and stacking for Jupiter, Saturn, Mars and Venus.

Lunar surface imaging

2.4 µm pixels and 19.8 MP (5440 × 3648) resolution support detailed lunar mosaics and close-up imaging.

Narrowband and near-infrared imaging

380–1100 nm monochrome response supports filter-based seeing control and contrast enhancement.

Solar imaging with approved filtration

Can be used for solar capture only with an appropriate certified solar filter and safe observing setup.

Specifications

G3CMOS20000KMA

25 specification rows

The G3CMOS20000KMA is an astronomy camera in the G3CMOS planetary series, built around a Sony IMX183 monochrome CMOS sensor, 19.8 MP (5440 × 3648) resolution, 2.4 µm pixels, frame rates up to 30 fps, a USB 3.0 interface. It suits planetary where reliable imaging performance and interface compatibility matter.

Sensor & Imaging

ModelG3CMOS20000KMA
StatusCurrent
ApplicationPlanetary
SensorSony IMX183 monochrome CMOS
Sensor TypeBack-illuminated monochrome CMOS
Sensor Size1-inch, 13.06 × 8.76 mm
Resolution19.8 MP (5440 × 3648)
Pixel Size2.4 µm
Shutter TypeRolling shutter

Performance

Frame Rate30 fps
ADC12-bit
Peak QE>84%
Dynamic Range75 dB
Read Noise2.6–1.4 e⁻
Full Well15 ke⁻
Spectral Range380–1100 nm

Interface & Thermal

InterfaceUSB 3.0
MountAstronomy adapter / telescope interface
CoolingAir-cooled

Additional Published Specifications

Sensor Diagonal15.72mm
Maximum SNR41.6dB
Frame Buffer512MB
Back Focal Distance17.5mm
Protective WindowIR/AR
Color Filter ArrayRGGB

Technical media

Performance graphs and technical drawings

Official sensor-response, performance, and mechanical imagery for the G3CMOS20000KMA.

G3CMOS20000KMA Planetary Camera
G3CMOS20000KMA Planetary Camera
G3CMOS20000KMA Planetary Camera
G3CMOS20000KMA Planetary Camera
G3CMOS20000KMA Planetary Camera
G3CMOS20000KMA Planetary Camera

System integration

Integration and compatibility

Use these checks to connect G3CMOS20000KMA to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Lens and microscope interface
Mount: Astronomy adapter / telescope interface
Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.
Sensor and sampling
Sensor: Sony IMX183 monochrome CMOS · Sensor Type: Back-illuminated monochrome CMOS
Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.
Interface and data rate
Frame Rate: 30 fps · Interface: USB 3.0
Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.
Cooling and noise floor
Dynamic Range: 75 dB · Read Noise: 2.6–1.4 e⁻
Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Technical FAQ

Integration questions for G3CMOS20000KMA

What lens mount is required for the G3CMOS20000KMA?

Mount: Astronomy adapter / telescope interface. Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.

What sensor and pixel pitch does the G3CMOS20000KMA use?

Sensor: Sony IMX183 monochrome CMOS · Sensor Type: Back-illuminated monochrome CMOS. Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.

How does the G3CMOS20000KMA connect to the acquisition computer?

Frame Rate: 30 fps · Interface: USB 3.0. Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.

What is the noise performance of the G3CMOS20000KMA?

Dynamic Range: 75 dB · Read Noise: 2.6–1.4 e⁻. Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Need help choosing?

Tell us your sensor, resolution, spectral range, frame-rate, interface, and software requirements and we will confirm the matching configuration and lead time.

Open camera finder

Model selection

Nearby series comparison

Compare G3CMOS20000KMA with the closest available models in the G3CMOS planetary family.

Selection parameterG3CMOS20000KMA (current)G3CMOS10300KPAG3CMOS20000KPA
SensorSony IMX183 monochrome CMOSSony IMX294 color CMOSSony IMX183 color CMOS
Resolution19.8 MP (5440 × 3648)11.6 MP (4128 × 2808)19.8 MP (5440 × 3648)
Sensor size1-inch, 13.06 × 8.76 mm4/3-inch, 19.11 × 13.0 mm1-inch, 13.06 × 8.76 mm
Pixel size / frame rate2.4 µm4.63 µm2.4 µm

Other cameras on the IMX183 sensor

The IMX183 appears in 21 models across the catalogue, differing in cooling, shutter, interface and colour filter. Compare them side by side before settling on a variant.