44 models · 5 series
Infrared Laser, 980 NM Infrared Diode Lasers, High Power Diode Laser System.
28 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | Operating temperature (℃) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Modulation option | Power Stability (rms, 4 hours ± 3°C) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-II-OEM) | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Operating voltage(internal PCB) | Dimensions of internal PCB | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-980 | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-980L | 980 nm | 1~200 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-980 | 980 nm | 1~2500 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-980 | 980 nm | 2.5~5 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-980 | 980 nm | 5~8 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-980-SM | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-980 | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-980 | 980 nm | 1~50 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980L | 980 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980R | 980 nm | 1~500 mW | <3%, <2%, <1% | – | – | ~10 / ~20 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Round | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980 | 980 nm | 1~2500 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-980 | 980 nm | 2.5~5 W | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-980 | 980 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-980 | 980 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-SN-980 | 980 nm | 6~12 W | – | – | – | <3.0 | <5 | 10-35 | – | >10000 | Multimode | – | – | – | – | – | – | – | <2%, <1%, (<0.5% optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980-SM | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-E-980 | 980 nm | 1~30 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-980 | 980 nm | 1~200 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-980 | 980 nm | 1~50 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-980 | 980 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-980 | 980 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-980 | 980 nm | 1~100 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | Datasheet |
| PGL-VI-980 | 980 nm | 1~100 mW | – | – | – | <1 / <8 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | 1 | – | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | 3VDC | mm2 / Φ12×50 | – | – | Datasheet |
| PGL-VI-FC-980 | 980 nm | 1~100 mW | – | – | – | <1 / <8 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | 1 | – | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | 3VDC | mm2 / Φ12×50 | – | – | Datasheet |
| PGL-FS-980 | 980 nm | 1~400 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | Datasheet |
| PGL-V-H-FC-980 | 980 nm | 1~1000 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | – | – | 100-240VAC | 12VDC | Datasheet |
| PGL-H-980 | 980 nm | 1~1500 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | Datasheet |
| PGL-V-H-980 | 980 nm | 1~2000 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | – | – | 100-240VAC | 12VDC | Datasheet |
RGB Laser |
4 models| Model | Wavelength | Output / average power | Power stability | Fiber type | Fiber Core Diameter (μm) | Fiber Connector | Fiber jacket | Warm-up time (minutes) | Operating temperature (℃) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-980/1064 | 980 nm | 30/30 W | <1% | – | – | – | – | – | – | – | – | Datasheet |
| FC-980/1470 | 980 nm | 20/15 W | <1% | MM fiber | 400 | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | Datasheet |
| FC-980/1470/1940 | 980 nm | 15/15/7 W | <1% | – | – | – | – | – | – | – | – | Datasheet |
| FC-980/1940 | 980 nm | 10/7 W | <1% | MM fiber | 400 | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | Datasheet |
High Power Laser Diode Module |
5 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Core Diameter | Fiber Length | Fiber Connector | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | Lead Soldering Temperature(10 s max) | Fiber Cladding Diameter | Fiber Buffer Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-980-100-2 | 980 nm | 100 W | 13.6 / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | – | – | Datasheet |
| LDM-980-200-4 | 980 nm | 200 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-980-300-2 | 980 nm | 300 W | - / 28.5. / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | 500 | Datasheet |
| LDM-980-30-2 | 980 nm | 30 W | - / 5.1 / - / V | – | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | – | – | Datasheet |
| LDM-980-50-2 | 980 nm | 50 W | - / 8.5 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | – | – | – | Datasheet |
Fiber Coupling Multi Wavelength Laser |
4 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Polarization ratio | Fiber type | Fiber Core Diameter(μm) | Fiber NA | Fiber Connector | Fiber Length (m) | Fiber jacket | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RGB-980/1030 | 980 nm | 500/200 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC-PC/ FC-APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | Datasheet |
| RGB-980/1064 | 980 nm | 500/200 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC-PC/ FC-APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | Datasheet |
| RGB-980/1310 | 980 nm | 500/20 mW | <1% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| RGB-980/1550 | 980 nm | 500/100 mW | <1% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
Lasers for Medical Treatment |
3 models| Model | Wavelength | Output / average power | Fiber Core Diameter (um) | Fiber Connector | Fiber length (m) | Power stability(rms, over 4 hours) | Warm-up time (minutes) | Operating temperature (℃) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| YL-F-980/808/520/455 | 980 nm | 23 W | 400, 600… | SMA905/ FC | 1 (Fiber length can be customized ) | <1% | <5 | 10-30 | 10000 | 1 year | Datasheet |
| YL-F-980/808/635/455 | 980 nm | 23 W | 400, 600… | SMA905/ FC | 1 (Fiber length can be customized ) | <1% | <5 | 10-30 | 10000 | 1 year | Datasheet |
| YL-S-980/808/635/520/455 | 980 nm | 24 W | 400, 600… | – | – | <1% | <5 | 10-30 | 10000 | 1 year | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.