Back to Home

Fiber output, PM options, seed formats

FL-355-SLM 355 nm single-frequency CW fiber laser

355 nm
  • The FL-355-SLM is a 355 nm single-frequency CW fiber laser with 10 mW and 20 mW output configurations.
  • Output / average power: 10 mW or 20 mW
  • Spectral linewidth: <50 kHz or <20 kHz
  • Operating mode: CW
FL-355-SLM fundamental-frequency unit alongside the UV laser head
Fundamental-frequency unit and third-harmonic head.

Specifications

FL-355-SLM

21 specification rows

Wavelength355 ± 1 nm
Operating modeCW
Output / average power10 mW or 20 mW
Longitudinal modeSingle longitudinal mode (SLM)
Transverse modeTEM₀₀
Spectral linewidth<50 kHz or <20 kHz
Power stability (RMS, 4 h, ±3 °C)<1% or <0.5%
Relative intensity noise (RMS, 10 Hz–3 MHz)<0.5% or <0.3%
M²<1.2
Beam diameter0.6 ± 0.1 mm
Beam divergence (full angle)<1 mrad
Beam ellipticity>90%
Pointing stability<50 µrad or <15 µrad
Polarization ratio>100:1
Warm-up time<30 min
Beam height from base plate38.5 mm
CoolingWater-cooled
Operating temperature15–30 °C
Operating voltage110/220 V AC
Expected lifetime>10,000 h
Laser classClass 3B

Confirm the required linewidth, power stability, relative intensity noise and pointing stability with your chosen output power when requesting a quotation.

Construction details

  • Fundamental-frequency unit: A polarization-maintaining fiber laser supplies the light for harmonic conversion. 507 × 483 × 120 mm (L × W × H), 19 kg.
  • Third-harmonic head: A separate head converts the fundamental light to the 355 nm output. 608 × 73 × 159 mm (L × W × H), ≈7.3 kg.
  • Water chiller: Circulating water cools the laser system. 258.4 × 370 × 240.6 mm (L × W × H), 10 kg.
FL-355-SLM datasheet (PDF)

What do you need?

  • Output power (10 mW or 20 mW)
  • Spectral linewidth
  • Power stability
  • Relative intensity noise
  • Pointing stability
  • Application

Model selection

Nearby series comparison

Compare FL-355-SLM with the closest available models in the Fiber Lasers family.

Selection parameterFL-355-SLM (current)FL-266-PSFL-266-Pico
Wavelength355 nm266 nm266 nm
Optical power / pulse energy10 mW or 20 mW1~10 mW1~50 mW
Operating mode / pulse widthCWPassively Q-switchedPulsed
Beam quality<1.2<2<2