Technology guide
Stepper-motor stages: steps, torque and missed motion
Choose the drive around loaded motion, settling and position verification rather than only the nominal step size.
- 01Step command
- 02Motor torque
- 03Transmission
- 04Stage motion
How it works
- A stepper motor develops torque as its electrical phases are driven in sequence. The coupled transmission converts that rotation into the required movement.
- Microstepping subdivides commanded electrical positions. It can improve smoothness, but it does not guarantee that each commanded increment produces an equally accurate mechanical increment.
- Available torque depends on speed, drive voltage, winding characteristics and current control. A holding-torque figure is not a high-speed motion rating.
- An open-loop step sequence does not verify that the load followed every command. Homing or encoder feedback serves a separate position-reference function.
What to compare
| Parameter | Check in the specification |
|---|---|
| Motor and driver | Match winding current, phase arrangement and drive requirements. |
| Speed and load | Use the torque-speed curve with transmission efficiency and acceleration. |
| Position reference | Identify home switches, limit switches and any encoder feedback. |
| Settling | Check vibration and residual motion after the move, not only maximum speed. |
Integration
- Set acceleration and current for the actual payload and mounting orientation.
- Check cable and connector assignments before connecting a motor drive.
- Use independent position verification when missed motion would invalidate the measurement.
Related products
- CXP15-40
Drive: A two-phase Shinano STP-28D1003-08 stepper motor turns a 6 mm ball screw with a 1 mm lead to move the platform.
- Automatic M² Beam-Quality Measurement
Detector assembly: CN0310VIS-B.
- LAK20-60
References
Discuss the configuration. Send the travel, payload, trajectory and feedback requirements.