Technology guide
Ball-screw stages: rotary drive and linear positioning
Separate screw lead, guidance, encoder feedback and actual platform accuracy.
- 01Motor rotation
- 02Ball screw
- 03Linear carriage
- 04Position feedback
How it works
- A ball screw converts rotation into translation through recirculating rolling balls between screw and nut. Its lead sets the nominal travel per revolution.
- The guide system constrains the carriage; the screw supplies thrust. Screw accuracy alone does not establish the complete stage's straightness or angular error.
- Preload can reduce clearance, but drive compliance and thermal change still affect positioning. A motor encoder can measure screw rotation without directly measuring the sample position.
- Microstepping and controller command increments describe drive settings. They must not be substituted for measured accuracy or repeatability.
What to compare
| Parameter | Check in the specification |
|---|---|
| Screw lead | Use lead and motor rotation to estimate nominal displacement and required speed. |
| Accuracy and repeatability | Keep unidirectional and bidirectional results separate. |
| Feedback location | Identify motor-side versus linear feedback and the axis being measured. |
| Dynamics | Check speed, acceleration, payload and the permitted duty cycle together. |
Integration
- Confirm the motor and controller electrical pairing for the exact stage.
- Account for cable forces and overhung loads when planning acceleration.
- Compare positioning at the experiment point, including guide errors and temperature effects.
Related products
References
Discuss the configuration. Send the travel, payload, trajectory and feedback requirements.