Technology guide
Crossed-roller guidance: bearing geometry and loading
Check bearing preload, motion accuracy and moment loads when selecting a compact rolling guide.
- 01Moving platform
- 02Alternating rollers
- 03Guide surfaces
- 04Base
How it works
- Crossed-roller guides arrange adjacent rollers in alternating orientations. The rolling contacts support loads while constraining unwanted platform motions.
- Guidance does not supply the positioning drive. A micrometer, screw, motor or piezo mechanism may move the stage through the guide.
- Preload influences clearance, stiffness and friction. It must be considered alongside rail straightness, assembly alignment and payload.
- Pitch, yaw and roll describe angular errors around different axes. A small linear resolution does not establish low angular motion at the sample.
What to compare
| Parameter | Check in the specification |
|---|---|
| Load direction | Keep vertical, lateral and moment ratings distinct. |
| Travel accuracy | Compare straightness and angular error over the required stroke. |
| Preload and friction | Check the manufacturer's operating and mounting conditions. |
| Drive arrangement | Confirm the actual actuator rather than inferring it from the guide type. |
Integration
- Place the working load near the intended support region where practical.
- Use the published mounting pattern and fastening sequence to avoid distorting the guide.
- Include Abbe offsets when a specimen or probe sits above the bearing plane.
Related products
- CXP15-40
Drive: A two-phase Shinano STP-28D1003-08 stepper motor turns a 6 mm ball screw with a 1 mm lead to move the platform.
- Automatic M² Beam-Quality Measurement
Detector assembly: CN0310VIS-B.
References
Discuss the configuration. Send the travel, payload, trajectory and feedback requirements.