Technology guide
Precision motion components: drive, guide and feedback
Build a positioning specification around the complete mechanical chain and the experiment's measurement point.
- 01Actuator
- 02Transmission
- 03Guidance
- 04Working point
How it works
- The actuator generates motion or force. A transmission converts it into the required movement, while guidance constrains the remaining degrees of freedom.
- A position sensor measures one part of this chain. Its location determines which mechanical errors are inside the feedback loop.
- Resolution, repeatability and accuracy are different properties. A fine command increment does not establish the actual position of the specimen.
- Offsets between a guide or encoder axis and the working point turn angular errors into displacement errors. Mounting geometry therefore matters alongside catalogue travel.
What to compare
| Parameter | Check in the specification |
|---|---|
| Trajectory | Specify stroke, speed, acceleration and settling for the loaded system. |
| Error budget | Separate straightness, angular error, backlash and thermal drift. |
| Payload | Include orientation, moments and attached cables rather than only total mass. |
| Feedback | Match the measured axis, sensor range and controller interface. |
Integration
- Choose guides and drives by function before selecting a particular stage family.
- Use exact-model drawings to check constraints and attachment points.
- Validate performance at the actual optical or mechanical working point after assembly.
Related products
- 1310/1550nm High-Power Single-Stage Optical Isolator
Fiber arrangement: SMF-28.
- CXP15-40
Drive: A two-phase Shinano STP-28D1003-08 stepper motor turns a 6 mm ball screw with a 1 mm lead to move the platform.
- CXP20-60
Guidance assembly: Crossed-roller bearing guides.
References
Discuss the configuration. Send the travel, payload, trajectory and feedback requirements.