Back to Home

Spectroscopy measurement systems

ST10 Ultrafast Time-Resolved Spectroscopy System

  • Configurable spectral interval: 200–900 nm
  • System time resolution: ≤6 ps at the shortest time window
  • Time-window selection: 500 ps–1 ms, ten ranges
  • Modes: Static, low-frequency and high-frequency scanning
  • Spectrograph focal lengths: 200 / 320 / 500 / 750 mm
  • System spectral resolution, 1200 lines/mm: ≤0.3 / ≤0.2 / ≤0.1 / <0.08 nm
ST10 Time-Resolved Spectroscopy System: Collected emission → Spectrograph + streak → Wavelength–time map, measurement workflow schematic
Measurement workflow · schematic, not a mechanical drawing

Best suited to

Time-resolved photoluminescence, semiconductor carrier dynamics and plasma emission.

Selecting a configuration

Select the required time window and spectral band together. The highest temporal resolution, broadest single-shot band and finest spectral resolution require different optical settings.

Measurement & configuration

  • Static spectral acquisition and transient streak images.
  • Lifetime-curve extraction and system control software.
  • Precision relay and focal-plane alignment.

Plan the signal path

  1. 1Collected emission
  2. 2Spectrograph + streak
  3. 3Wavelength–time map

Specifications

ST10 Time-Resolved Spectroscopy System specifications
Configurable spectral interval200–900 nm
System time resolution≤6 ps at the shortest time window
Time-window selection500 ps–1 ms, ten ranges
ModesStatic, low-frequency and high-frequency scanning
Spectrograph focal lengths200 / 320 / 500 / 750 mm
System spectral resolution, 1200 lines/mm≤0.3 / ≤0.2 / ≤0.1 / <0.08 nm
Single-shot span, 150 lines/mm>200 / >120 / >80 / >50 nm

Configuration note: Resolution and coverage are configuration-dependent. The quotation identifies the camera manufacturer and the optical integration supplied.

Configure ST10 Time-Resolved Spectroscopy System

Send the wavelength interval, signal level, timing and sample requirements for your experiment.

Request a configuration