Technology guide
Diffraction gratings: orders, blaze and dispersion
Choose a grating around useful wavelength coverage, efficiency and order control.
- 01Incident light
- 02Periodic grooves
- 03Diffraction orders
- 04Dispersed spectrum
How it works
- A diffraction grating redirects light through interference from a periodic optical structure. Different wavelengths leave in directions set by the incidence geometry and diffraction order.
- Groove density influences angular dispersion, but it does not independently establish an instrument's resolution.
- Blaze and coating influence efficiency across a wavelength range. An efficiency peak is not a promise of equal throughput throughout the band.
- Different orders can overlap in a detector or exit band. Order-sorting filters and the instrument configuration determine which light is recorded.
What to compare
| Parameter | Check in the specification |
|---|---|
| Geometry | Keep incidence, diffraction angle and selected order with calculations. |
| Efficiency | Use the curve for the actual grating, coating and polarization. |
| Instrument fit | Check ruled area, substrate dimensions and turret compatibility. |
| Stray light | Consider order overlap, scatter and the complete optical enclosure. |
Integration
- Choose the grating together with slit width and detector coverage.
- For scanning instruments, confirm the calibrated wavelength range for the installed turret.
- Avoid treating lines per millimetre as a standalone spectral-resolution specification.
Related products
References
Discuss the configuration. Send the sample format, spectral range, resolution and detection requirements.