Technology guide
Czerny–Turner spectrometers: slit, mirrors and grating
Choose the slit, grating and detector as one optical system rather than equating a focal length with spectral resolution.
- 01Entrance slit
- 02Collimating mirror
- 03Grating
- 04Focused spectrum
How it works
- A Czerny–Turner arrangement uses reflective optics around a dispersive grating. Light from the entrance slit is collimated, dispersed and focused at an exit plane.
- A scanning monochromator selects a band through an exit slit. An array spectrograph can record a spread spectrum across a detector instead.
- Slit width, dispersion and optical aberrations jointly influence spectral bandpass. Narrowing a slit also changes throughput.
- Crossed and other layout variations change packaging and optical behaviour. The exact model's optical design must be read from its own documentation.
What to compare
| Parameter | Check in the specification |
|---|---|
| Grating | Keep groove density, blaze, order and working band together. |
| Slits | Match entrance and exit settings to the desired bandpass and source image. |
| Detector | Check spectral coverage, pixel sampling and focal-plane geometry. |
| Ports | Confirm actual entrance and exit arrangements and required adapters. |
Integration
- Specify wavelength span and resolution before choosing the grating and slit package.
- Check source coupling and detector acceptance to avoid losing light outside the useful optical path.
- Use a documented instrument specification rather than deriving resolution from focal length alone.
Related products
- Aurora 4000
Detector assembly: Toshiba TCD1304DG linear CCD array.
- Omni-λ Series
- RTS-mini
References
Discuss the configuration. Send the sample format, spectral range, resolution and detection requirements.