Spectral cameras & detectors
TEHVPMT Cooled Photomultiplier Assemblies
A thermoelectrically cooled photomultiplier assembly combines high voltage, a shielded detector housing and a selectable side-window tube for weak optical signals.
Best suited to
Scanning fluorescence, transmission, reflection and source-emission measurements.
Selecting a configuration
Select the tube and output electronics for the wavelength and signal level. Tube model names identify internal components; the product listed here is the integrated cooled assembly.
Measurement & configuration
- Integrated PMT and high-voltage arrangement.
- Electromagnetic shielding.
- Two published tube configurations.
Plan the signal path
- 1Weak spectral light
- 2Cooled PMT assembly
- 3Signal acquisition
Specifications
| Models | TEHVPMT-CR131(-MS) / TEHVPMT-R928(-MS) |
|---|---|
| Response | 185–900 nm |
| Cooling | −10 °C at 20–25 °C ambient |
| Cathode size | 8 × 24 mm |
| Pulse rise time | 2.2 ns |
| Electron transit time | 22 ns |
| Typical anode dark current | 3 nA |
| Dark counts, 1 s at −10 °C | 150 / 250, tube dependent |
Related spectral cameras & detectors
DField-VS-A1/A2/A3 Cooled Spectral CCDs
Spectrograph readout for Raman, fluorescence and emission measurements.
ExploreDfield-SWIR-640-DC Cooled InGaAs Camera
SWIR fluorescence, hyperspectral integration and semiconductor inspection.
ExploreDInAs3800-TE Cooled InAs Detector
Single-point near- and mid-infrared wavelength scanning.
ExploreConfigure TEHVPMT-CR131 / TEHVPMT-R928
Send the wavelength interval, signal level, timing and sample requirements for your experiment.