Technology guide
Photomultiplier tubes: photocathodes and electron gain
Select spectral response, multiplication and readout mode for weak optical signals without confusing a PMT with a silicon photomultiplier.
- 01Photons
- 02Photocathode
- 03Electron multiplication
- 04Anode signal
How it works
- A conventional PMT converts photons into photoelectrons at a photocathode and amplifies the electron signal before collection at an anode.
- Photocathode material and window transmission determine spectral sensitivity. Gain does not compensate for photons that are never converted.
- The bias network and multiplication structure affect linearity, timing and saturation. Use the operating voltage and current limits for the actual tube or assembly.
- Analogue current measurement and photon counting require different signal processing. A silicon photomultiplier is a different detector architecture and is not described by this PMT signal path.
What to compare
| Parameter | Check in the specification |
|---|---|
| Spectral band | Use the photocathode and window response for the measurement wavelength. |
| Gain and bias | Keep supply and divider conditions with the gain specification. |
| Dark signal | Check temperature, background light and the selected readout regime. |
| Timing and linearity | Compare pulse response, count-rate limits and average-current limits separately. |
Integration
- Confirm whether the housing includes the tube, high-voltage supply and signal amplifier.
- Use documented optical shielding and electrical connections.
- Specify wavelength, light level and timing needs before choosing analogue or photon-counting electronics.
Related products
- TEHVPMT-CR131 / TEHVPMT-R928
Cooling assembly: −10 °C at 20–25 °C ambient.
- PMTH Room-Temperature Photomultiplier Tubes
References
Discuss the configuration. Send the wavelength, signal level, active area and bandwidth requirements.