Transmitters & Receivers
Plug-Play Fiber Optical Transmitter 2.5GHz Analog/Digital
The RFOF Transmitter (Tx) and Receiver (Rx) pair is engineered to transmit analog or digital RF signals over optical fiber, providing a secure and reliable link between two short-distance locations. Designed for high-security applications, this system ensures low-loss, high-fidelity signal transport while maintaining signal integrity. An optional RF Fiber Break configuration is available, enabling unidirectional RF transmission over a single fiber link. This feature prevents signals from being passed in the return direction, ensuring one-way communication for enhanced security and isolation, often required in military and critical infrastructure applications. This series of RFOF links covers a wide frequency range from 5 MHz to 2.5 GHz, featuring an exceptionally flat frequency response for both analog and digital signals.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
RF Frequency: 2.5GHz · Wavelength: 1550 nm · TX/RX: Receiver · Package: Module · Directional: Monodirectional · RF Fiber Breaker: Non · Fiber Connector: SC/UPC
System integration
Integration and compatibility
Use these checks to connect Plug-Play Fiber Optical Transmitter 2.5GHz Analog/Digital to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- RF Fiber Breaker: Non, Yes · Fiber Connector: SC/UPC, FC/APC, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1550 nm, 1310 nm
- Check the Transmitters & Receivers passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for Plug-Play Fiber Optical Transmitter 2.5GHz Analog/Digital
Which fiber and connector does the Plug-Play Fiber Optical Transmitter 2.5GHz Analog/Digital use?
RF Fiber Breaker: Non, Yes · Fiber Connector: SC/UPC, FC/APC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Plug-Play Fiber Optical Transmitter 2.5GHz Analog/Digital be included in an optical power budget?
Wavelength: 1550 nm, 1310 nm. Check the Transmitters & Receivers passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Plug-Play Fiber Optical Transmitter 2.5GHz Analog/Digital with the closest available models in the Transmitters & Receivers family.
| Selection parameter | Plug-Play Fiber Optical Transmitter 2.5GHz Analog/Digital (current) | InGaAs/Si Receiver Optical Sub Assembly (ROSA) |
|---|---|---|
| Wavelength range | 1550 nm, 1310 nm | 1230-1620nm, 400-1000nm, 850nm |
| Connector / control | SC/UPC, FC/APC, Special | — |
