Fiber Optical Amplifiers EDFA
Fiber Optical Amplifier EDFA: 1528-1565nm (< 26dBm), 1535-1565nm (< 43dBm)
Our Erbium-Doped Fiber Amplifier (EDFA) is a cost-effective solution for optical signal amplification, utilizing high-reliability semiconductor lasers, Wavelength Division Multiplexing (WDM) components, isolators, and erbium/ytterbium-doped fibers to deliver high power output, gain, low noise, and long operational life. Available in both preamplifier and booster configurations. It features a compact module with a universal control interface PCB for system integration, as well as a turnkey benchtop model with a computer interface and GUI for laboratory use. A pluggable model with a standardized host rack is available for network deployments. For power levels below 25dBm, the EDFA covers a wavelength range from 1528-1565nm, while for higher power levels, the wavelength range reduces to 1535-1565nm. For longer wavelength needs, L-band amplifiers are recommended.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Type: Booster · Power/Gain: 17dBm/50mW · Output Channel: One · Polarization: Random · Package: Component (>26dBm) · Cable Type: 0.9mm tube · Fiber Length: 1.0m · Connector: None · Low Temperature: 5°C · High Temperature: 40°C · Control Mode: APC · Filter: None
Downloads
Datasheets & documents
- EDFA High Power
- EDFA MSA max 24dBm User manual
- EDFA 511 23 40dBm Componenet User Manual 1 20260423
- EDFA HP Benchtop Basic User Manual
- EDFA HP Benchtop Interlock User Manual
- EDFA HP Benchtop Rev Interlock User Manual
- EDFA HP Benchtop Turn key & Interlock User Manual 20251224
- EDFA HP Benchtop User Manual Big Box
- EDFA M511 HP Benchtop Front panel control User Manual 20251224
- EYDFA M511 High Power UART protocol V1.3 20260507
- MSA EDFA Frame Command Comment V1.01 20220513
- MSA Module 20250810
- EDFA GUI
- FTDI Driver
System integration
Integration and compatibility
Use these checks to connect Fiber Optical Amplifier EDFA: 1528-1565nm (< 26dBm), 1535-1565nm (< 43dBm) to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Length: 1.0m · Connector: None, FC/APC, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Control interface
- Control Mode: APC, ACC, CC
- Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.
Technical FAQ
Integration questions for Fiber Optical Amplifier EDFA: 1528-1565nm (< 26dBm), 1535-1565nm (< 43dBm)
Which fiber and connector does the Fiber Optical Amplifier EDFA: 1528-1565nm (< 26dBm), 1535-1565nm (< 43dBm) use?
Fiber Length: 1.0m · Connector: None, FC/APC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Does the Fiber Optical Amplifier EDFA: 1528-1565nm (< 26dBm), 1535-1565nm (< 43dBm) require a controller?
Control Mode: APC, ACC, CC. Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Fiber Optical Amplifier EDFA: 1528-1565nm (< 26dBm), 1535-1565nm (< 43dBm) with the closest available models in the Fiber Optical Amplifiers EDFA family.
| Selection parameter | Fiber Optical Amplifier EDFA: 1528-1565nm (< 26dBm), 1535-1565nm (< 43dBm) (current) | EDFA Amplifiers: Low Latency | Mini Erbium Doped Fiber Amplifier 1528-1565nm |
|---|---|---|---|
| Connector / control | None, FC/APC, Special | None, FC/APC, Special | None, FC/APC, Special |
