Fiber Optical Amplifiers EDFA
Multiport EDFAs 1528-1565nm
The EDAR Series are low-noise, high-performance Erbium-Doped Fiber Amplifiers (EDFAs) that provide the ideal building blocks for FTTx networks. It can amplify both analog and digital signals up to 100GHz. Integrated CWDM splitters are available to enable the routing of 1310 nm and 1490 nm data streams from the OLT to the ONU through the EDFA, reducing component count, lowering the FIT rate, and improving system performance. The EDAR Series provides a robust and reliable amplification solution for FTTx networks using RF video overlay. We provide solutions to handle mid to small-sized municipal networks while meeting the demanding requirements of large Tier 1 service providers. Our team of engineers and scientists will work with you to customize configurations. The EDFA has isolators on both input and output.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 1550nm · Power: 21dBm · Channel: 4 · Package: 2U · CWDM: No · Electric: 110-220V · Connector: LC/PC
System integration
Integration and compatibility
Use these checks to connect Multiport EDFAs 1528-1565nm to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Connector: LC/PC, FC/PC, FC/APC, SC/PC, SC/APC, LC/APC
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1550nm, Special
- Check the Fiber Optical Amplifiers EDFA passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for Multiport EDFAs 1528-1565nm
Which fiber and connector does the Multiport EDFAs 1528-1565nm use?
Connector: LC/PC, FC/PC, FC/APC, SC/PC, SC/APC, LC/APC. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Multiport EDFAs 1528-1565nm be included in an optical power budget?
Wavelength: 1550nm, Special. Check the Fiber Optical Amplifiers EDFA passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Multiport EDFAs 1528-1565nm with the closest available models in the Fiber Optical Amplifiers EDFA family.
| Selection parameter | Multiport EDFAs 1528-1565nm (current) | Mini Erbium Doped Fiber Amplifier 1528-1565nm | Wide Temperature EDFA Amplifier -40 to 70 °C |
|---|---|---|---|
| Wavelength range | 1550nm, Special | C Band, Special | 1535-1565nm, L Band, Red Band, Blue Band, Special |
| Connector / control | LC/PC, FC/PC, FC/APC, SC/PC, SC/APC, LC/APC | None, FC/APC, Special | None, FC/APC, Special |
