Zolix · Motorized Stages
CZF8-60 Motorized Vertical Stage
Motorized vertical stage with 8 mm travel and a 60×60 mm table. Transmission: timing belt; guide: crossed-roller bearing guides. Repositioning accuracy ≤±3 µm; max speed 5 mm/s. Horizontal load capacity 4 kg; weight 1 kg.
- Travel range
- 8 mm
- Repositioning accuracy
- ≤±3 µm
- Horizontal load capacity
- 4 kg
- Table size
- 60×60 mm
Specifications
Mechanical
| Travel range (mm) | 8 |
|---|---|
| Table size (mm) | 60×60 |
| Ball screw | φ6, 1mm lead |
| Transmission mechanism | Timing belt |
| Transmission ratio | 1:1 |
| Guide mechanism | Crossed-roller bearing guides |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 1 |
Accuracy
| Resolution, full/half step (µm) | 5/2.5 |
|---|---|
| Resolution, 8× microstep (µm) | 0.625 |
| Max speed (mm/s) | 5 |
| Repositioning accuracy (µm) | ≤±3 |
| Static parallelism (mm) | ≤0.1 |
Motor & electrical
| Travel per motor revolution (mm) | 1 |
|---|---|
| Motor and step angle (°) | Two-phase 28 stepping motor, 1.8 |
| Motor model | Shinano, STP-28D1003-1504 |
| Motor current (A) | 1.5 |
| Motor torque (N·m) | 0.0785 |
| Stepper driver (optional) | Moons, SR2 |
| Self-locking after power off | No |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Cable type | High flexibility cable (Helukabel, Germany) |
| Cable length (m) | 0.2 |
| Limit sensors (built-in) | 2×GP1S09xHCPI (SHARP, Japan) |
| Origin sensor (built-in) | 1×GP1S09xHCPI (SHARP, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor current consumption (mA) | <60 (total) |
| Sensor output | NPN open-collector output DC5~24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Sensor output logic | Output ON when sensor is blocked |
Load capacity
| Horizontal load capacity (kg) | 4 |
|---|
Compatible controllers
For the two-phase 28 stepping motor this stage uses.