Zolix · Motorized Stages
MC600-2B Motion Controller
2-axis MC600 motion controller for two-phase stepper motors; 32-bit DSP architecture; RS-232 and USB 2.0 host interfaces; front-panel LCD display; hardware support for 3-axis linear and 2-axis circular interpolation.
- Controlled axes
- 2 axes
- Compatible motor type
- Two-phase stepper motor (24 V, 3.5 A max)
- Host communication interface
- RS-232 and USB 2.0
- Processor architecture
- 32-bit DSP processor (150 MHz)
Specifications
| Controlled axes | 2 axes |
|---|---|
| Compatible motor type | Two-phase stepper motor (24 V, 3.5 A max) |
| Processor architecture | 32-bit DSP processor (150 MHz) |
| Max pulse output frequency | 400 kHz |
| Microstep resolution | Up to 256 subdivisions (51,200 pulses/rev) |
| Control mode | Open-loop or closed-loop with digital PID servo control |
| Speed profile mode | Trapezoidal speed control (separate initial, constant, and acceleration speeds) |
| Motion modes | Point-to-point, incremental, synchronous/asynchronous motion |
| Interpolation functions | 3-axis linear interpolation, 2-axis circular interpolation |
| Host communication interface | RS-232 and USB 2.0 |
| Display | 240 × 128 matrix LCD display (105 × 56 mm) |
| Position sensor inputs | Dedicated origin point, positive limit, and negative limit switch inputs per axis |
| External encoder input | Closed-loop feedback support via external optical grating rulers |
| General digital I/O | 16-channel I/O (8 TTL inputs, 8 open-collector outputs) |
| Control software | Zolix MC600 control software (optional manual joystick supported) |
| Power supply | 115 / 220 V AC, 50 / 60 Hz, 400 W max |
| Dimensions (W × D × H) | 440 × 395 × 145 mm |
| Weight | ≤ 7.5 kg |