Pulse energy, repetition rate, pulse width
PS-FG-1030A1030 nm near-infrared pulsed laser
1030 nmPS-FG-1030A is a 1030 nm Pulsed laser. Used for sapphire marking, ceramic cutting, semiconductor cutting, film scribing. Picosecond Pulsed Infrared Laser. Key specifications: operating mode Pulsed, output / average power 1~5 W, single pulse energy (uj) 1-10. View specifications, datasheet and enquiry options from Precisometer.
Specifications
PS-FG-1030A
23 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 1~5 W |
| Beam / notes | Picosecond Pulsed Infrared Laser |
| Single pulse energy (uJ) | 1-10 |
| pulse | duration, / high |
| Ave power stability (rms, 4 hours±3℃) | <5%, <3% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.5 |
| M2 | <1.3 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±1 |
| Average power (W) | 1-5 |
| Rep. rate (kHz) | 500-1000 |
| Pulse duration (ps) | 10±1 |
| Peak power (MW) | 0.5-1 |
| Beam diameter at the aperture (1/e2,mm) | <2 |
| M² | <1.3 |
| Beam height from base plate (mm) | 122 |
Applications
Uses named on this model’s datasheet.
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Film scribing
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the PS-FG-1030A with nearby pulsed lasers across the wavelength range.
