Fiber output, PM options, seed formats
MGL-N-588588 nm yellow fiber laser
588 nmMGL-N-588 is a 588 nm Fiber laser. Used for scientific experiment, optical sensor, measurement, communication. Fiber output laser High Stability Yellow Laser. Key specifications: output / average power 300~500 mW, operating mode CW, power stability (rms, 4 hours ± 3°c) <3%, <2%, (<1% optional). View specifications, datasheet and enquiry options from Precisometer.
Specifications
MGL-N-588
20 specification rows
| Output / average power | 300~500 mW |
|---|---|
| Beam / notes | Fiber output laser High Stability Yellow Laser |
| Operating mode | CW |
| Power Stability (rms, 4 hours ± 3°C) | <3%, <2%, (<1% optional) |
| Transverse mode | Near TEM00 |
| M2 | <3.0 |
| Warm-up time (minutes) | <10 |
| Polarization ratio | >50:1(100:1 optional), Horizontal(Vertical optional) |
| Pointing Stability Over Temperature (urad/°C) | <20 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 588±2 |
| Output power (mW) | 300-500 |
| M² | <3.0 |
| Beam divergence, full angle (mrad) | <1.5 |
| Beam diameter at the aperture (1/e2, mm) | ~3.0 |
| Pointing Stability(urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 68.4 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
Applications
Uses named on this model’s datasheet.
- Scientific experiment
- Optical sensor
- Measurement
- Communication
- Spectrum analysis
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the MGL-N-588 with nearby fiber lasers across the wavelength range.
