Back to Home
Precisometer

Pulse energy, repetition rate, pulse width

HPL-405-T405 nm violet high-power pulsed laser

405 nm

HPL-405-T is a 405 nm Pulsed laser. Used for marking, carving, measure, scientific research. Key specifications: output / average power 200 uJ/ 2 W, repetition rate 1~10 kHz, pulse width <15 ns. View specifications, datasheet and enquiry options from Precisometer.

Datasheet (PDF)Back to Pulsed LasersBekijk alle lasermodellen

Specifications

HPL-405-T

3 specification rows

Wavelength405 nm
Output / average power200 uJ/ 2 W
Repetition rate1~10 kHz
Pulse width<15 ns

Applications

Uses named on this model’s datasheet.

  • Marking
  • Carving
  • Measure
  • Scientific research

Need this configured?

Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.

Open laser selector

Related pulsed lasers

Compare the HPL-405-T with nearby pulsed lasers across the wavelength range.

Choosing a laser

Guides that put this laser in context

Which specifications decide the experiment, and which ones cost money without changing the result.

All guides
Laser emission spectrum, intensity noise traces, and beam quality profiles illustrating the main laser specifications
Photonics
13 min Spec lab

Laser specifications decoded

Linewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.

Open guide
Laser pulse absorbed by a blood vessel producing acoustic waves for photoacoustic detection
Photoacoustic imaging
15 min Source lab

Choosing a laser for photoacoustic imaging

Connect optical absorption to wavelength, pulse fluence, stress confinement, acoustic bandwidth, repetition rate, and synchronization at the sample.

Open guide
Ultrafast laser beams passing through mirrors and lenses on a darkened optical table
Ultrafast spectroscopy
18 min System lab

Building a pump–probe spectroscopy system

Design the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.

Open guide