Pulse energy, repetition rate, pulse width
AO-1064A1064 nm near-infrared Q-switched pulsed laser
1064 nmAO-1064A is a 1064 nm Pulsed laser. Used for laser inner carver, laser marking, scientific research. & 532A; M²: <1.2. Key specifications: operating mode Actively Q-switched, output / average power 1000 mW& 500, pulse energy 1000 uJ & 500 uJ. View specifications, datasheet and enquiry options from Precisometer.
Specifications
AO-1064A
22 specification rows
| Operating mode | Actively Q-switched |
|---|---|
| Output / average power | 1000 mW& 500 |
| Pulse energy | 1000 uJ & 500 uJ |
| Repetition rate | 1-10 kHz |
| Pulse width | ~12 ns @1 kHz |
| Power stability | <2%, <1% |
| M² | <1.2 |
| Beam / notes | & 532A |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <3 |
| Polarization ratio | >100:1 Horizontal |
| Warm-up time (minutes) | <10 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 10-35 |
| Operating voltage (VDC) | 12V/25A |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1064±1 |
| Average power (W) | 1-1.5@1kHz |
| Rep. rate | 1Hz-10kHz |
| Ave power stability (over 4 hours) | <2%, <1% |
| Beam diameter at the aperture (1/e2, mm) | ~0.8 |
| Beam height from base plate (mm) | 79 |
Applications
Uses named on this model’s datasheet.
- Laser inner carver
- Laser marking
- Scientific research
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the AO-1064A with nearby pulsed lasers across the wavelength range.
