Pulse energy, repetition rate, pulse width
DPS-266- Neoma is a 266 nm Pulsed laser. Used for icp-ms scientific research, laser processing, scientific research. Key specifications: pulse energy 1-100 mJ, repetition rate <12 Hz, operating mode Actively Q-switched. View specifications, datasheet and enquiry options from Precisometer.
Specifications
18 specification rows
| Pulse energy | 1-100 mJ |
|---|---|
| Repetition rate | <12 Hz |
| Operating mode | Actively Q-switched |
| Pulse duration (ns) | <12 |
| Jitter (ns, sdev) | <1ns (Int.) |
| energy | diode / pumped / all / solid / state |
| Beam diameter (mm) | ~3.5×3.5 |
| Beam divergence, full angle (mrad) | ≤7 |
| Warm-up time (minutes) | <15 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 15-35 |
| Operating voltage (VDC) | 48V/7.3A |
| Expected lifetime (pulses) | 109 |
| Wavelength (nm) | 266±1 |
| Single pulse energy (mJ) | 1-3 |
| Rep. rate | 1-100Hz (adjustable) |
| Energy stability (std dev/mean) | <5%,<3%,<2% |
| Beam height from base plate (mm) | 46 |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
DPS-266- Neoma: 266 nm emission determines compatible optics, coatings and detectors for ICP-MS scientific research. The catalogued beam parameter (≤7) helps predict how the source will focus and propagate through the instrument.
DPS-266- Neoma: Laser processing depends on how optical energy is delivered to the target; 266 nm emission governs absorption, while the listed temporal parameter (1-100 mJ) governs peak intensity and heat deposition.
DPS-266- Neoma: 266 nm emission determines compatible optics, coatings and detectors for Scientific research. The catalogued beam parameter (≤7) helps predict how the source will focus and propagate through the instrument.
System integration
Use these checks to connect DPS-266- Neoma to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Air cooled · Operating temperature (℃): 15-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Beam diameter (mm): ~3.5×3.5 · Beam divergence, full angle (mrad): ≤7. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare DPS-266- Neoma with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | DPS-266- Neoma (current) | MPL-Q-266 | MPL-Q1-266 |
|---|---|---|---|
| Wavelength | 266 nm | 266 nm | 266 nm |
| Optical power / pulse energy | 1-100 mJ | 1~30 mW | 10 mW |
| Operating mode / pulse width | <12 Hz | 3-12 kHz | 1 kHz |
| Beam quality | ≤7 | Near TEM00 | Near TEM00 |
Compare the DPS-266- Neoma with nearby pulsed lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Photoacoustic imagingConnect optical absorption to wavelength, pulse fluence, stress confinement, acoustic bandwidth, repetition rate, and synchronization at the sample.
Open guide
Ultrafast spectroscopyDesign the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.
Open guide