Back to Home

Technology guide

LED drivers: current regulation and pulse control

Match electrical regulation, load voltage and timing to the selected LED assembly.

  1. 01Control input
  2. 02Current regulator
  3. 03LED load
  4. 04Optical response
Conceptual operating path.

How it works

  • An LED current driver regulates the current delivered to its load within the available voltage and power limits.
  • Current amplitude control and pulse-width control change illumination in different ways. The supported mode and timing must be verified for the actual controller.
  • The LED's forward voltage and series arrangement determine the voltage the driver must supply. Channel current alone does not establish load compatibility.
  • The complete light pulse depends on the electrical output, cable and emitter. A controller command rate is not a measurement of optical rise time.

What to compare

ParameterCheck in the specification
Load compatibilityKeep forward-voltage range, channel current and connection topology together.
Pulse operationCheck minimum pulse width, repetition conditions and supported duty cycle.
Control inputsMatch logic levels, analogue range, triggering and isolation requirements.
Channel behaviourCheck simultaneous operation, synchronization and total supply limits.

Integration

  • Use the selected LED's permitted continuous and pulsed operating conditions.
  • Confirm connector pinout and whether the supply, cables and cooling controls are included.
  • For quantitative illumination, measure output in the actual delivery path rather than inferring it from the current command alone.

Related products

References

Discuss the configuration. Send the signal range, bandwidth, timing and electrical interfaces.