Technology guide
LED light sources: emission, spectrum and delivery
Match an LED's spectrum and optical delivery to the experiment, with drive current and heat removal kept in the same specification.
- 01Current drive
- 02LED emitter
- 03Collection optics
- 04Illumination
How it works
- An LED generates light through radiative recombination of electrically injected carriers in a semiconductor. Its output has a finite spectral band rather than a single laser line.
- The emitting area and angular distribution affect how much light can be collected. Total radiant flux is different from power delivered through a small aperture or fiber.
- Drive current and junction temperature influence output and spectral behaviour. A finished light source adds packaging, thermal paths and optical delivery around the emitter.
- Fast electrical control does not by itself establish the light pulse seen at the sample. Driver dynamics and the complete optical path matter.
What to compare
| Parameter | Check in the specification |
|---|---|
| Spectrum | Use peak wavelength, bandwidth and temperature conditions for spectral matching. |
| Useful output | Compare power at the relevant aperture, connector or sample plane. |
| Drive conditions | Keep current, duty cycle and pulse settings with an output rating. |
| Delivery | Confirm collimation, fiber, lightguide and microscope coupling options. |
Integration
- Check the required current controller and cooling hardware for the actual source.
- Include filters and coupling losses when estimating sample illumination.
- Do not treat a PCB-mounted emitter as a complete cooled optical system unless that assembly is documented.
Related products
- LED-254-P1 PCB-mounted LED
Emitter carrier: 20 mm hexagonal copper-core PCB.
- Optogenetics Starter Kits
- Deep UV 235-340nm Collimated LED Sources
References
Discuss the configuration. Send the spectrum, sample area, delivered output and timing requirements.