Technology guide
LED packaging and heat removal: from emitter to sink
Plan the complete thermal path from LED junction to the environment rather than relying on a metal-core board alone.
- 01LED junction
- 02Package and board
- 03Thermal interface
- 04Heat sink
How it works
- The LED package transfers heat from the active device toward its mounting structure. The exact path depends on the emitter package and board.
- A metal-core carrier can provide a conductive heat path and mechanical support. It still needs an effective thermal interface and an appropriate heat-removal arrangement.
- Electrical power not converted to emitted light contributes to heating. Optical output alone is therefore not the heat-sink load.
- Junction, board, case and ambient temperatures refer to different locations. A board temperature is not automatically a junction-temperature measurement.
What to compare
| Parameter | Check in the specification |
|---|---|
| Operating load | Keep current, pulse duty and ambient conditions with the thermal calculation. |
| Thermal interfaces | Use the specified mounting pressure, interface material and contact geometry. |
| Heat rejection | Check passive or forced-air cooling in the intended orientation and enclosure. |
| Temperature limits | Read the rating at its stated reference point and operating conditions. |
Integration
- Confirm whether the product includes only the emitter board or a complete heat-sink assembly.
- Confirm whether thermal interfaces and cooling hardware are supplied or must be integrated separately.
- Check output stability after the assembly reaches operating temperature.
Related products
- LED-254-P1 PCB-mounted LED
Emitter carrier: 20 mm hexagonal copper-core PCB.
- LED-260-P1 PCB-mounted LED
Emitter carrier: 20 mm hexagonal copper-core PCB.
- LED-270-P1 PCB-mounted LED
Emitter carrier: 20 mm hexagonal copper-core PCB.
References
Discuss the configuration. Send the spectrum, sample area, delivered output and timing requirements.