Technology guide
FPGA timing: logic, clock domains and physical interfaces
Translate a timing requirement into clocked logic and compatible I/O without assuming programmable logic gives unlimited timing precision.
- 01Clock and events
- 02Synchronisation
- 03Programmable logic
- 04Physical outputs
How it works
- An FPGA implements configurable digital logic. Counters, sequencers and interfaces can operate concurrently in hardware.
- Clock frequency sets one timing scale, but I/O delays, jitter and implementation constraints affect actual input-to-output behaviour.
- Signals crossing unrelated clock domains require suitable synchronisation or asynchronous transfer structures. A simulation without metastability behaviour does not validate a clock-domain crossing.
- Logical output timing and electrical drive are different requirements. Level translation, line drivers and termination belong to the external interface.
What to compare
| Parameter | Check in the specification |
|---|---|
| Timing contract | Specify edge placement, latency, jitter and accepted event patterns separately. |
| Clock domains | Identify asynchronous inputs and each reference clock. |
| I/O standard | Check voltage, polarity, loading and cable interface. |
| Verification | Use timing constraints and hardware measurements for the implemented design. |
Integration
- Confirm which timing and pattern functions the supplied firmware supports.
- Do not treat a general FPGA capability as a product-specific feature.
- Check startup states and synchronization with the detector or light source before relying on programmed delays.
Related products
- sMAX04BM
Detector assembly: GSENSE2020BSI (sCMOS).
- MC-Archimedes.N
- UTT810 Universal Time Tagger
References
Discuss the configuration. Send the signal range, bandwidth, timing and electrical interfaces.