Technology guide
Global-shutter cameras: exposure and synchronisation
Use a common exposure interval for moving objects or pulsed illumination, then account for readout, trigger latency and saturation.
- 01Trigger
- 02Common exposure
- 03Signal storage
- 04Readout
How it works
- A global exposure captures the sensor rows over a common time interval. The stored image can then be read out sequentially without turning the exposure itself into a rolling exposure.
- Global exposure does not mean zero trigger delay. Input circuitry, sensor timing and the selected acquisition mode establish the delay and jitter.
- Storage and readout arrangements differ between sensors. Full-well capacity, noise and sensitivity must be compared in the actual global-shutter mode.
- Motion during the common exposure still causes blur. A global shutter prevents row timing distortion; it does not freeze an object by itself.
What to compare
| Parameter | Check in the specification |
|---|---|
| Exposure timing | Use the camera timing diagram to locate the actual sensitive interval. |
| Trigger latency | Separate fixed delay, jitter and the minimum interval between accepted triggers. |
| Frame rate | Check whether readout overlaps the next exposure and whether any dead time remains. |
| Illumination | Fit the optical pulse inside the documented exposure interval rather than using the host software command time. |
Integration
- Test timing with the camera exposure output and a photodetector when short light pulses matter.
- Use exposure duration and object speed to calculate allowable motion blur.
- Check whether a mode described as global reset still uses rolling readout of exposure end times.
Related products
- I3CMOS00500KMA
Detector assembly: Sony IMX433LLJ.
- High-Sensitivity USB2.0 Color 1.4MP 2/3" CCD Cameras with Frame Buffers
Detector assembly: 2/3" Sony ICX285AQ, Global Shutter.
- High-Sensitivity USB2.0 Monochrome 1.4MP 2/3" CCD Cameras with Frame Buffers
Detector assembly: 2/3" Sony ICX285AL, Global Shutter.
References
Discuss the configuration. Send the wavelength, field of view, exposure and trigger requirements.