Technology guide
Rolling-shutter cameras: row timing and moving scenes
Plan motion, light pulses and scan timing around the row-to-row exposure delay of a rolling shutter.
- 01Row start
- 02Integration
- 03Row readout
- 04Next row
How it works
- A rolling shutter starts or ends exposure at different times for successive rows. Each row can have the same integration duration while observing a different moment.
- A moving object can therefore appear skewed or stretched. The effect depends on motion direction, row timing and total sensor readout time.
- Short pulsed illumination can form bright and dark bands if only some rows are sensitive during the pulse. A long exposure setting alone does not establish that every row overlaps.
- A global-reset option can align exposure starts without necessarily aligning their ends. Read the timing diagram for that exact mode.
What to compare
| Parameter | Check in the specification |
|---|---|
| Row time | Find the interval between neighbouring row operations and the direction of scanning. |
| Readout duration | Check full-frame and cropped-region timing separately. |
| Overlap window | Confirm whether all rows share an interval suitable for a common light pulse. |
| Triggering | Check how an external trigger interacts with sensor reset and the current frame. |
Integration
- For moving inspection targets, calculate displacement across the full readout rather than just during one row exposure.
- For scanned illumination, coordinate scan motion with the sensor row direction and timing.
- Use a true global-exposure mode when the measurement cannot tolerate row timing differences.
Related products
- AVCAM290A
Detector assembly: Sony IMX307.
- CN0204VIS-B
- CN0204VIS-NIR-B
References
Discuss the configuration. Send the wavelength, field of view, exposure and trigger requirements.