Back to Home

Technology guide

CMOS cameras: pixels, parallel readout and image quality

Follow the CMOS signal path and compare read noise, shutter mode and data rate without treating megapixels as a sensitivity specification.

  1. 01Photons
  2. 02Pixel conversion
  3. 03Parallel readout
  4. 04Digital image
Conceptual operating path.

How it works

  • CMOS image sensors integrate photosensitive pixels with addressing and readout electronics. Charge-to-voltage conversion is performed locally rather than shifting every charge packet to a shared CCD output.
  • Column and pixel circuitry permit parallel readout. The number of channels, analogue-to-digital conversion and operating mode determine the practical frame rate.
  • Pixel-to-pixel and column-to-column behaviour require calibration. Offset, gain and defective-pixel corrections are distinct from random read noise.
  • CMOS does not specify the shutter arrangement. Rolling exposure, global reset and true global exposure must be checked for the selected sensor and mode.

What to compare

ParameterCheck in the specification
Read-noise statisticCompare rms values in equivalent gain, speed and shutter modes; a median alone hides the distribution.
Full well and conversion gainCheck saturation at the intended gain setting rather than equating ADC bit depth with usable dynamic range.
ThroughputCalculate the image payload from pixel count, bit depth and frame rate before choosing a host interface.
Spectral efficiencyMatch the sensor coating, illumination side and wavelength-dependent response to the experiment.

Integration

  • Use published triggering diagrams when synchronising LEDs, lasers or moving samples.
  • Check full-frame performance separately from a fast cropped region of interest.
  • For scientific quantitative work, retain calibration data and distinguish raw output from processed display images.

Related products

References

Discuss the configuration. Send the wavelength, field of view, exposure and trigger requirements.