Back to Home

Mightex · USB2.0 C-Series CCD cameras

High-Sensitivity USB2.0 Color 1.4MP 2/3" CCD Cameras with Frame Buffers

  • Resolution: 1,392 x 1,040 Color
  • Sensor: 2/3" Sony ICX285AQ, Global Shutter
  • Pixel size: 6.45 x 6.45 μm
  • Frame rate: 15 @1392 x 1040 fps
  • Bit depth: 8/12 bit
1 part number6 technical documents

Your enquiry

Part number CXE-C013-U

Discuss my setup

Quotation-based: tell us about the setup and we prepare a quotation for it.

Manufactured by Mightex. Precisometer is a Mightex distribution partner: we quote, integrate and support Mightex products, with in-person support in the Netherlands and Belgium.

From Mightex

About the High-Sensitivity USB2.0 Color 1.4MP 2/3" CCD Cameras with Frame Buffers

Configuration choices

  • Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.
  • Trigger cable is NOT included and needs to be ordered separately

Specifications

Technical specifications

ParametersCXE-C013-UUnit
Board-Level/EnclosedEnclosed
Number of GPIOs4
Resolution1,392 x 1,040 Color
Bit8/12bit
CCD Chip2/3" Sony ICX285AQ, Global Shutter
Pixel Size6.45 x 6.45μm
Active Imager Size(Diagonal) 11.0mm
Scanning SystemProgressive
Frame Rates* (@28MHz Clock)15 @1392 x 1040 29 @696 x 520 (2x2 Bin) 37 @464 x 344 (3x3 Bin) 49 @348 x 256 (4x4 Bin) 49 @348 x 256 (1:4 Skip)fps
Sub Resolutions696 x 520(2x2 Bin), 464 x 344 (3x3 Bin), 348 x 256 (4x4 Bin),348 x 256 (1:4 Skip)
Shutter Speed (Exposure Time)0.05 ~ 200,000ms
Hardware Gains6 ~ 43dB
Trigger ModeWith external trigger
Trigger CableACC-CAM-DIN8
Trigger Delay< 25μs
Strobe OutYes
Lens MountCS– mount or C-mount
Built-in FiltersIR-cut (factory standard), or IR-pass, or no filter
Power Consumption< 1.8W
Dimension95 x 70 x 38.5 (CS-mount) 95 x 70 x 43.5 (C-mount)mm
Weight (excluding lens)150g
RECOMMENDED SYSTEM CONFIGURATION
ProcessorPentium III 900 MHz or better, or a compatible processor
Operating SystemWindows 2000, XP, Vista, 7, 8, and 10
RAM256MB or greater
Hard Disk Space30MB for software installation, plus additional space for storing captured images
Display24bit True Color
USB2.0 Host ControllerIntel integrated host controller (recommended)

Reproduced from Mightex (official page), retrieved 2026-10-15.

Construction details

  • Detector assembly: 2/3" Sony ICX285AQ, Global Shutter.
High-sensitivity 1.4MP color 2/3" CCD camera datasheet

Ordering and integration

What you need with it

In the box (Mightex packing list)

  • 1x Camera (w/o an imaging lens)
  • 1x IR-cut filter (pre-installed, retail version only)
  • 1x USB Cable
  • Notes: (1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC).

Notes from Mightex

  • Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.
  • Trigger cable is NOT included and needs to be ordered separately

Combining this with other equipment? Ask for an integration check.

Downloads

Technical documents