Automated optical test
A known routing map and repeatable insertion loss allow one source or detector to serve multiple devices under test.
Representative Zolix product-family image; model appearance may vary by configuration.
Monochromators and SPE · Imaging Monochromator
Omni-ShutterD
Shutter | Suitable for the side entrance list of Omni-λ200i. Omni-ShutterD is a configurable optical switch or shutter in the Imaging Monochromator family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
Catalog context
Where Omni-ShutterD fits
Omni-ShutterD is listed in the Imaging Monochromator family. Use the product-family page and any model-specific downloads available here to confirm the required configuration.
Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Engineering reference
Specify Omni-ShutterD from the interfaces inward
Omni-ShutterD is a configurable optical switch or shutter in the Imaging Monochromator family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
An optical switch or shutter changes the optical path or state. Topology and latching behavior define routing, while insertion loss, isolation, repeatability and transition timing determine whether the device is transparent to the measurement.
The local price-list record does not provide a complete model specification or datasheet. These fields identify what must be confirmed on the model drawing and quotation without inventing an option-dependent value.
Configuration fields to confirm
- Topology and default state
- Define port count, routing map, normally open/closed state and latching requirement.
- Optical band
- Specify wavelength, fiber mode, polarization and connector at every port.
- Loss and isolation
- Set insertion-loss, return-loss, crosstalk and extinction requirements.
- Switching dynamics
- Confirm rise, fall, bounce and settling time at the intended trigger rate.
- Power handling
- Provide continuous and peak optical power plus expected duty cycle.
- Control and safety
- Define TTL, analog, USB or other interface, drive voltage, interlock behavior and state after power loss.
Qualification sequence
- 1Define the measurement objective and the performance limit that Omni-ShutterD must satisfy.
- 2Freeze wavelength, mechanical, fiber and electrical interfaces before selecting option codes.
- 3Check loss, noise, heat, motion or vibration contributions in the complete system budget.
- 4Confirm the final drawing, pinout, environmental suffix and acceptance test with the quotation.
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Laser gating and interlock
Extinction, response time and fail-safe state determine whether a shutter can provide the required exposure and safety behavior.
Technical FAQ
Integration questions for Omni-ShutterD
What must be specified before ordering Omni-ShutterD?
Confirm topology and default state, optical band, loss and isolation, switching dynamics, power handling, and control and safety. These fields are coupled, so the final part number should be checked against the complete instrument rather than selected from the model name alone.
How should Omni-ShutterD be integrated into the system?
An optical switch or shutter changes the optical path or state. Topology and latching behavior define routing, while insertion loss, isolation, repeatability and transition timing determine whether the device is transparent to the measurement. Freeze the optical, mechanical and electrical interfaces before releasing the surrounding assembly.
Which documentation should be approved for Omni-ShutterD?
Approve the configuration-specific specification, mechanical drawing, connector or pinout definition, environmental suffix and acceptance-test limits supplied with the quotation. Any field absent from the local record remains a confirmation item, not an assumed capability.
Model selection
Nearby series comparison
Compare Omni-ShutterD with the closest available models in the Imaging Monochromator family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Omni-ShutterD (current) | Omni-Shutter92 | Omni-ShutterF |
|---|---|---|---|
| Spectral range | Confirm for this model | Confirm for this model | Confirm for this model |
| Resolution | Confirm for this model | Confirm for this model | Confirm for this model |
| Focal length / f-number | Confirm for this model | Confirm for this model | Confirm for this model |
| Grating | Confirm for this model | Confirm for this model | Confirm for this model |
Related products
Omni-λ2002i
Imaging Monochromator | 200mm focal length imaging monochromator with a interchangeable dual grating turret & micrometer controlled entrance and multichannel detector adapter flange on 180° end exit port
Omni-λ2003i
Imaging Monochromator | 200mm focal length imaging monochromator with a interchangeable dual grating turret & micrometer controlled entrance and multichannel detector adapter flange on 180° end exit port, plus exit slit 90° apart
Omni-λ2005i
Imaging Monochromator | 200mm focal length imaging monochromator with a interchangeable triple grating turret & micrometer controlled entrance and exit slit ,90° optical path ;
Omni-λ2007i
Imaging Monochromator | 200mm focal length dual exit port monochromator with with a interchangeable triple grating turret & micrometer controlled entrance slit, two micrometer controlled exit slits, Provides 90° and 180° optical paths.
