Opto-Mechanics · Cryogenic Piezo Stages - Adapter plates - interconnect
AP.LT.R16
Pure titanium interconnect adapter plate for mounting Rotator16 onto other MultiFields LT cryogenic positioners; non-magnetic screws included.
Datasheet (PDF) ↗Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Applications
Stacking mixed positioner series
Mate different body sizes — a Scanner16 onto a Rotator25 — without machining a custom part.
Building multi-axis towers
Assemble XYZ and rotation stacks with a defined, repeatable interface between each stage.
Non-magnetic assembly
Titanium plates and screws keep the stack usable inside high-field magnet bores.
Specifying this part
What this model has to survive, and what it needs around it
Heat load at the cold plate
Stick-slip inertial drives dissipate energy per step and draw no holding current once stopped, so the steady-state load on the mixing chamber is the wiring loom rather than the motor. Anchor the loom at each temperature stage and thermalise the moving body with an FTC copper braid.
Non-magnetic construction
Titanium bodies and BeCu fasteners throughout, rated for operation to 35 T and down to 30 mK with the .ULT option, at 2 × 10⁻¹¹ mbar with .UHV. A single steel screw substituted at installation is enough to compromise a high-field assembly.
Full series comparison, controller pairing and mounting hardware on the cryogenic piezo stages overview, or work through the selection with the configurator.
Related products
AP.LT.L16z
Pure titanium interconnect adapter plate for mounting Linear16-z onto other MultiFields LT cryogenic positioners; non-magnetic screws included.
AP.LT.L16x
Pure titanium interconnect adapter plate for mounting Linear16-x onto other MultiFields LT cryogenic positioners; non-magnetic screws included.
AP.LT.L25
Pure titanium interconnect adapter plate used for Scanner16 and 25 mm class LT positioner cross-mounting; non-magnetic screws included.
