Couplers, Splitters & Combiners
A planar lightwave circuit (PLC) splitter is an optical power management device fabricated using silica optical waveguide technology to distribute optical signals from the Central Office (CO) to multiple premise locations. Bare fiber splitter is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument, and WDM system, which minimizes space occupation.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 1310 · Port: 1x2 · Package: Standard · Fiber Type: 250um · Fiber Length: 0.25m · Input Connector: None · Output Connector: None
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
1xN Single Mode PLC Splitter: Optical power distribution depends on preserving the optical budget through the complete path. The 1310, 1550, C+L, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (250um, 900um tube, Special) must match the connected components.
1xN Single Mode PLC Splitter: Fiber sensing depends on preserving the optical budget through the complete path. The 1310, 1550, C+L, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (250um, 900um tube, Special) must match the connected components.
System integration
Use these checks to connect 1xN Single Mode PLC Splitter to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: 250um, 900um tube, Special · Fiber Length: 0.25m, 0.5 m, 1.0 m, 1.5 m, 2.0 m, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1310, 1550, C+L, Special. Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare 1xN Single Mode PLC Splitter with the closest available models in the Couplers, Splitters & Combiners family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | 1xN Single Mode PLC Splitter (current) | 1x2/2x2 Single Mode Broadband Fiber Optic Coupler | 1xN Single Mode PLC Splitter Module & Rack Package |
|---|---|---|---|
| Wavelength range | 1310, 1550, C+L, Special | Confirm for this model | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | 250um, 900um tube, Special | Confirm for this model | Confirm for this model |
| Connector / control | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC/PC, Special | Confirm for this model | Confirm for this model |
2×2 Double-Clad Fiber CouplersPolarization Maintaining (PM) Fiber Optic Couplers/Splitters – Large Port Count up to 1x120
1×3 Single Mode Monolithic Fiber Optic Coupler/Splitter
1x2/2x2 High Power Polarization Maintaining (PM) Fiber Optic Couplers/Splitters 30WHigh Power 1x2, 2x2 Single Mode Fiber Optic Coupler/SplitterHigh Power 1x2, 2x2 Multimode Fiber Optic Coupler/Splitter