Couplers, Splitters & Combiners
High Power 1x2, 2x2 Single Mode Fiber Optic Coupler/Splitter
The HPFC Series fiber optic coupler is fully tested and burned in at the specified high power for quality control. 2×2 can be used as 1×2 in which the reflected optical power is safely guided out through the extra fiber. An angle termination is required to avoid back reflection. The coupler is based on our fused biconical taper technology and compact packaging structure. It features good uniformity, low excess loss, and very low polarization sensitivity. The device is ideal for splitting or combining light with exceptional performance over a wide wavelength range.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Power: 10W · Wavelength: 1550 · Grade: P Grade · Package: (ø)3x(L)54 · Splitting Ratio: 01/99 · Fiber Type: SM28 · Fiber Cover: 250μm fiber · Fiber Length: 0.5m · Connector*: None
System integration
Integration and compatibility
Use these checks to connect High Power 1x2, 2x2 Single Mode Fiber Optic Coupler/Splitter to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SM28, SM1950, Hi1060, Special · Fiber Cover: 250μm fiber, 900μm tube, 3mm cable, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1550, 1060, Special
- Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for High Power 1x2, 2x2 Single Mode Fiber Optic Coupler/Splitter
Which fiber and connector does the High Power 1x2, 2x2 Single Mode Fiber Optic Coupler/Splitter use?
Fiber Type: SM28, SM1950, Hi1060, Special · Fiber Cover: 250μm fiber, 900μm tube, 3mm cable, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the High Power 1x2, 2x2 Single Mode Fiber Optic Coupler/Splitter be included in an optical power budget?
Wavelength: 1550, 1060, Special. Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare High Power 1x2, 2x2 Single Mode Fiber Optic Coupler/Splitter with the closest available models in the Couplers, Splitters & Combiners family.
| Selection parameter | High Power 1x2, 2x2 Single Mode Fiber Optic Coupler/Splitter (current) | High Power 1x2, 2x2 Multimode Fiber Optic Coupler/Splitter |
|---|---|---|
| Wavelength range | 1550, 1060, Special | 915, 975 |
| Fiber type | SM28, SM1950, Hi1060, Special | 0.22NA 105/125 |
| Connector / control | None, FC/PC, FC/APC, Special | None, FC/PC, FC/APC, Special |
Related couplers, splitters & combiners
2×2 Double-Clad Fiber Couplers
Polarization Maintaining (PM) Fiber Optic Couplers/Splitters – Large Port Count up to 1x120
1×3 Single Mode Monolithic Fiber Optic Coupler/Splitter- 1x2/2x2 High Power Polarization Maintaining (PM) Fiber Optic Couplers/Splitters 30W
- High Power 1x2, 2x2 Multimode Fiber Optic Coupler/Splitter
Switchable Fiber Optical Splitter/Coupler