Laser delivery
Mode-field, NA, connector polish and bend radius determine coupling efficiency, back-reflection and delivered beam quality.
Fiber Optic Communication Data Links
Optical Patch Cord
Optical Patch Cord is a configurable fiber-optic interconnect in the Fiber Optic Communication Data Links family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
Engineering reference
Specify Optical Patch Cord from the interfaces inward
Optical Patch Cord is a configurable fiber-optic interconnect in the Fiber Optic Communication Data Links family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
A fiber interconnect is an optical component with modal, polarization and reflection behavior. Fiber construction, connector geometry and termination quality must match the source and receiving optics; identical connector shells do not imply optical compatibility.
The source record contains no configuration table or datasheet. The fields below are therefore procurement requirements to confirm, not claimed values for every option.
Configuration fields to confirm
- Fiber architecture
- Specify single-mode, multimode, PM or specialty fiber, including core, NA and mode-field diameter.
- Wavelength range
- Confirm attenuation, mode guidance and coating suitability across the operating band.
- Connector termination
- Define FC/PC, FC/APC, SMA905 or other interfaces at both ends and key orientation for PM fiber.
- Length and routing
- State finished length, minimum bend radius, jacket and strain-relief requirements.
- Optical performance
- Set insertion loss, return loss, polarization extinction and power-handling limits.
- Environment
- Confirm temperature, vacuum, radiation, humidity or flex-cycle requirements for the installed route.
Qualification sequence
- 1Define the measurement objective and the performance limit that Optical Patch Cord must satisfy.
- 2Freeze wavelength, mechanical, fiber and electrical interfaces before selecting option codes.
- 3Check loss, noise, heat, motion or vibration contributions in the complete system budget.
- 4Confirm the final drawing, pinout, environmental suffix and acceptance test with the quotation.
Application context
Why this design is used
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Fiber-optic instrumentation
Stable insertion loss and known polarization behavior keep calibration valid when sources, switches and detectors are interconnected.
Technical FAQ
Integration questions for Optical Patch Cord
What must be specified before ordering Optical Patch Cord?
Confirm fiber architecture, wavelength range, connector termination, length and routing, optical performance, and environment. These fields are coupled, so the final part number should be checked against the complete instrument rather than selected from the model name alone.
How should Optical Patch Cord be integrated into the system?
A fiber interconnect is an optical component with modal, polarization and reflection behavior. Fiber construction, connector geometry and termination quality must match the source and receiving optics; identical connector shells do not imply optical compatibility. Freeze the optical, mechanical and electrical interfaces before releasing the surrounding assembly.
Which documentation should be approved for Optical Patch Cord?
Approve the configuration-specific specification, mechanical drawing, connector or pinout definition, environmental suffix and acceptance-test limits supplied with the quotation. Any field absent from the local record remains a confirmation item, not an assumed capability.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Optical Patch Cord with the closest available models in the Fiber Optic Communication Data Links family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Optical Patch Cord (current) | Optical Add/Drop Multiplexer (OADM) | Optical Transport Unit (OUT) |
|---|---|---|---|
| Wavelength range | Confirm for this model | Confirm for this model | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | Confirm for this model |
| Connector / control | Confirm for this model | Confirm for this model | Confirm for this model |
